Installation and Connection Instructions
Removing Transit Packaging
Important! Ensure all transit packaging is removed prior to installation. Retain transit packaging for future use.
3The appliance is supplied with a spanner (H) and plastic caps (E) (2 pcs.) and (G) (1 pc).
01. Remove the hose holder (A).
2.Remove the 2 screws (B) with the spanner supplied (H).
3.Remove the 4 screws (C).
4.Remove the transit bar (D).
5.Cover the holes left by screws (B) the 2 plastic caps (E).
Important: When fitting the plastic caps, press until they snap into the rear panel securely.
6.Replace the 4 screws (C), for safe keeping.
7.Remove the screw and compression spring (F) with the spanner (H), cover the hole with plastic cap (G).
Important: When fitting the plastic cap, press until they snap into the rear panel securely.
37