Bosch Appliances Axxis+ WFR 2460, Axxis+ WFR 2450 manual Min mm

Connection options

A Cold water connectionand

B Hot water connection(max. 140 °F // 60 °C)

min. 10 mm

or Cold water connection only with Y!piece

Water drainage

CAUTION

Do not bend or pull the water drainage hose.

Height difference between the placement area

of washer	and	the	drainage point:
Maximum 110 cm //			43 inches.
Standpipe	or	In	Wall Installation

min.

10 mm

q After the	connection:
Turn on	the water	completely,	and check
whether	connection	points are	watertight.

CAUTION

The connection points are under full water pressure. Check seal with tap fully open.

q Use the U-bracket. Attach the U-bracket to th end of the hose and insert end of hose into standpipe or wall drain.

q Use a	strap	or cable	tie connected to U-brac
to hold hose in place.
Drainage	into	a siphon

q Secure the connection point with a hose band clip.

45