Bosch Appliances Axxis+ WFR 2450, Axxis+ WFR 2460 manual Fuse

Program has already started; when a program hasReselect program; see Page 26. Before starting the started, the end time can no longer be selectedprogram,. select and start the desired end time; see

Page 19.

Fault	Possible cause	Action
Control lights do notA fuse has triggered.		Switch on/replace the	fuse.
shines.		Call Customer Service	if this fault is repeated.
	Power failure.	An interrupted program will be resumed when power
		returns. If the laundry	is to be removed during
		a power failure, proceed as described under
		•Emergency lock release"; see Page 29.

Appliance is in energy6saving mode. This is not a fault.

Press theSelect button; energy6saving mode is terminated.

Program	does not Start/Pause button not pressed.	Press theStart/Pause button.
start. Start/Pause
indicator	light
flashes.

Program does not start.

•Door open?" indicated in the display field.

•Press start" is indicated in the display field.

Loading door not	closed properly.	Check whether laundry is trapped in door.
		Close	the loading door (a click should be heard).
		Program continues.
End time selected	but still not activated	by pressingPress	theStart/Pause button.
the Start/Pause" button.

Program does not		End time selected and activated.	None. Appliance starts automatically.
start. •Time	delay"	is
indicated in	the
display field.

Clock cannot be setProgram. has already started; when a program hasWait until program ends. started, the clock cannot be set.

•Set clock:"		text	The setting has switched from hours	to minutes;None.
remains	in	the	both selection points have the same	text.
display	field	even
though	theMenu
button	has	been

pressed.

•--:--" is	Clock not set.
displayed instead	of
the end time in the
display field.

End time cannot beClock not set. selected.

Set clock; see Page 24.

Set clock; see Page 24.

36