Dimensions
a = | 600 | mm | // 5/23" |
|
|
| 8 |
b = | 590 | mm | // 1/22" |
|
|
| 2 |
1
c = 852 mm ///233"
Approx. weight = 69 kg // 152 lbs.
Installation area
WARNING
Never ground the washer to plastic plumbing lines, gas lines or hot water pipes.
Appliance stability is important to make sure the washing machine does not •walk" during the spin cycles.
The installation area must be solid and even. Sof floor surfaces, such as carpets or surfaces with foam backing, are not suitable.
If the washing machine is to be installed on a wooden floor:
q If possible, place the washing machine in a corner of the room.
q Screw a water8resistant wooden board (at leas 30 mm thick) to the floor.
q Secure the feet of the washing machine using holding brackets *.
If the washing machine is to be placed on a pedestal:
q Secure the feet of the washing machine using holding brackets *.
*Holding brackets (set) can be obtained from the Customer Service (order no. WMZ 2200).
WARNING
To reduce the risk of fire this washer mjust be fastened or otherwise secured to an uncovered concrete floor.
Pedestal Mounting
For mounting the washer on the Bosch 12" pedestal (accessory No. WTZ 1210) follow the instructions supplied with the pedestal.
41