Bosch Appliances Axxis+ WFR 2460 manual Soaking, Bleaching, Decolorizing Canceling Active program

Page 27
q Open the loading door. q Put in/remove the laundry. q Close the loading door.
q Press theStart/Pause button. Program continues.
Child lock is re6activated.
The indicator light shines (yellow).

Child lock activated

q Temporarily deactivate the child lock. See Page 23.

Soaking

The Soak setting is used to pre6treat heavily stained items:

i

i

If theStart/Pause indicator light flashes (yellow), the door cannot be opened for reasons of safety (water level, temperature or speed too high).

In the display it successively is indicated: •Pause",

•Door cannot be opened".

If theStart/Pause indicator light flashes (red), the laundry can be topped up or removed prematurely.

In the display it successively is indicated: •Pause",

•Door can be opened".

q Load laundry of the same color.

q Add the soaking agent to chamberI according to the manufacturers specifications.

qTurn the program selectorSoakto .

The Start/Pause indicator light flashes (red).

q Press theStart/Pause button. The program starts.

The indicator light shines (red).

iThe soak cycle lasts 2 hours with the temper ture held at 95 °F/32C . It is ended with a shor spin cycle. All the water is pumped out.

Bleaching

WARNING

DO NOT use liquid chlorine bleach in this machine. A powder oxygen based bleach or non6chlorinated based products are acceptable.

Decolorizing

Canceling

active program

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION

 

 

 

 

If you would like to terminate a program and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Decolorants

may

contain sulphur

or

chlorine.

remove the laundry:

 

q If the child

lock is active, temporarily

 

These substances

can

cause parts

of the

wash6

deactivate;

machine

to corrode.

Do

not

decolorize

items

see Page 23.

 

ing

 

of

laundry in the

washing

machine.

 

 

 

 

 

 

 

 

 

q Turn the program selectorDrainto orSpin.

i

If a program is interrupted at a high tempera6 ture, leave the laundry to cool down until glass is not hot to the touch.

q Press theStart/Pause button. q Wait until the program ends.

q If the child lock is active, deactivate again temporarily; see Page 23.

q Open the loading door. q Unload the laundry.

i

If a program is interrupted at a high temperature, the door may remain locked until the appliance has cooled down.

i

If the program is terminated by switching off the appliance, the door may remain locked.

27

Image 27
Contents WFR Contents Safety Instructions TheSAVEIntended Use IssuesDisposal Information Environmental Protection/ConservatiYour New Washing Machine Program Can be rotated in either direction Control panelSelecting Language Before Using ForUsing For the First Time First TimeDegrees of dirt Preparing, Sorting Loading LaundrySorting the laundry Preparing the laundryWarm Risk of EXPLOSION!d Loading the laundryRisk of POISONING!d Extra Cycle Program Selector ProgramsFunctions Basic ProgramsDisplay Field Option buttonsStart/Pause Button Indicator LightWashing with Standard Settings Quick Overview Washing with Individual SettingsSpin Speed Program finished at Reduced ironing Signal Child lock Standard time/Daylightsaving time Set clock Resetting the settings During Washing Decolorizing Canceling Active program SoakingBleaching After Washing Risk of SCALDING!d Emergency Lock ReleaseCleaning the drum User Maintenance InstructionsCleaning and Care Cleaning the detergent dispenserCleaning the drain pump Cleaning water inlet strainers Descaling Washing machine 800/944-2904 Customer ServiceTroubleshooting Minor Faults Fuse Cause Action Fault Displays Safety information Installation Connection TransportationAny dampness lift Installation area DimensionsBuiltin Installation Levelling Procedure Removing the transport bolts q Insert the covers Water connection Hose Cable LengthsMin mm Grounding Instructions Electrical connectionTransport When Moving 1001 am 5500 007