John Lewis JLWD 1406 1400 Display Programme time, Selection of drying time in minutes

Page 13

9 Display (Programme time)

The following pieces of information are shown on the display:

Duration of washing programme in hours and minutes, after you have selected a programme (for example 2.05).

2.05

The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.

While the programme is running (after you have pressed the Start/Pause button), the displayed time value decreases by one unit every minute.

1.25

The washer-dryer has stopped with water in the tub, at the end of the “Soak 30°”: this is indicated by a flashing zero.

The washer-dryer has completed the programme: this is indicated by a flashing zero.

0

After starting the programme, the remaining time is updated every minute.

Selection of drying time in minutes .

105

After starting the programme, the remaining time is updated every minute.

Important!

If you select a drying time longer then 55’ minutes, after 3 seconds, the display will show it in hours and minutes (see the example below).

Example:

60

1.

1.00

Time

Time

dry

dry

Delay start, a time value indicated in hours (23 hours max) and selected by means of the relevant button.

Delay

start

The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the Start/Pause button, the countdown is updated every hour, and, for the last two hours, every 30 minutes.

An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.

13

Image 13
Contents Jlwd Spin washer-dryer Child Safety InstallationUse Service Maintenance and CleaningEcological hints Environmental InformationContents Description of the Appliance Child safety featureDoor locked light Detergent dispenser drawerTechnical Specifications InstallationWashing DryingPositioning UnpackingHoses must bepumped out Water inlet Installation on a Suspended FloorWater drainage Appliance must be connected to a cold water supplySpecial conditions LevellingInterest of the environment Onto a sink outlet spigotElectrical connection «E» or by the earth symbol or coloured green and yellowPermanent connection Detergent dispenser drawer Programme selector dial Control panelSpin button Option buttonsAutomatic Dry button Delay start buttonTime dry button Start/Pause buttonSelection of drying time in minutes Display Programme timeE20 Programme phase indicator lightsEasy iron Programme informationLoad the laundry Switch the machine onMeasure out the detergent Select the spin speed or the None optionSelect the Delay start How to change an option or a programme during its cycleHow to interrupt a programme Select the desired optionsLeave the door ajar in order to air the machine End of programmePress the Start/Pause button to start the programme Drying900 r.p.m. for Cottons & Synthetics with electronic drying Sheet 1000g = 1 kgBath robe Important Notes Wash Care SymbolsWashing programmes Programme Consumptions Off ResetEnergy Water Time Description KWh SoakDegree Type of fabric Max. load Spin speed Drying time Mins Drying ProgrammesExtra dry Store dryMaintenance and Cleaning Remove any objects from the pump impeller by rotating it Cleaning the water inlet filterScrew the pump cover fully Close the pump door Emergency emptying out Something Not Working Spinning Machine vibrates whenDoor will not open Light has gone out Spinning starts late orAlways insist on genuine spare parts 0870 0105/06 132 981