John Lewis JLWD 1406 1400 Select the desired options, Start the programme, Select the Delay start

Page 17

The relevant light will light up.

1400

900

700

500 None

Spin

7. Select the desired options

If your laundry is very dirty, it may be advisable to select the “Prewash” option.

If your laundry is only slightly soiled, select the “Quick” option.

If you wish the laundry to undergo an extra rinse, select the “Extra Rinse” option.

The relevant light illuminates.

Extra

Prewash Quick rinse

9. Start the programme

Press the “Start/Pause” button. The relevant light will stop flashing, and only the light relevant to the phase that is in progress will remain lit. The machine starts operating.

If you have chosen a delayed start, the washer dryer will begin the countdown.

The display will show the duration of the programme or the selected delay.

10.How to change an option or a programme during its cycle

It is possible to change any option before the programme carries it out.

Before you make any change, you must pause the machine by pressing the “Start/Pause” button.

Changing a running programme is possible only by resetting it.

Turn the programme selector dial to “Off” and then to the new programme position.

Start the new programme by depressing the

Start/Pause” button. The washing water in the tub will not emptied out.

8. Select the “Delay start”

Before you start the programme, if you wish the start to be delayed, press the Delay start button repeatedly, or keep it pressed, to select the desired delay. The selected delay time value (up to 23 hours) will appear on the display for 3 seconds, then the duration of the programme will appear again.

Delay

start

During this period it is possible to load other laundry: press the “Start/Pause” button. Open the door. Load the laundry. Close the door and press the “Start/Pause” button again.

11.How to interrupt a programme

Depress the “Start/Pause” button to interrupt a programme which is running, the corresponding light starts to flash. Depress the button again to restart the programme.

12.How to open the door during the cycle of a programme

You can open the door, after having set the washing machine to Pause, provided the following conditions exist:

the machine is not in the heating phase beyond 55°C;

the level of the water is not high;

If these requirements are met, when you pause the washer dryer, the door locked light goes off and the door can be opened.

17

Image 17
Contents Jlwd Spin washer-dryer Use InstallationChild Safety Service Maintenance and CleaningEcological hints Environmental InformationContents Description of the Appliance Child safety featureDoor locked light Detergent dispenser drawerTechnical Specifications InstallationWashing DryingHoses must bepumped out UnpackingPositioning Water inlet Installation on a Suspended FloorWater drainage Appliance must be connected to a cold water supplySpecial conditions LevellingInterest of the environment Onto a sink outlet spigotPermanent connection «E» or by the earth symbol or coloured green and yellowElectrical connection Detergent dispenser drawer Programme selector dial Control panelSpin button Option buttonsAutomatic Dry button Delay start buttonTime dry button Start/Pause buttonSelection of drying time in minutes Display Programme timeE20 Programme phase indicator lightsEasy iron Programme informationLoad the laundry Switch the machine onMeasure out the detergent Select the spin speed or the None optionSelect the Delay start How to change an option or a programme during its cycleHow to interrupt a programme Select the desired optionsLeave the door ajar in order to air the machine End of programme900 r.p.m. for Cottons & Synthetics with electronic drying DryingPress the Start/Pause button to start the programme Bath robe 1000g = 1 kgSheet Important Notes Wash Care SymbolsWashing programmes Programme Consumptions Off ResetEnergy Water Time Description KWh SoakDegree Type of fabric Max. load Spin speed Drying time Mins Drying ProgrammesExtra dry Store dryMaintenance and Cleaning Screw the pump cover fully Close the pump door Cleaning the water inlet filterRemove any objects from the pump impeller by rotating it Emergency emptying out Something Not Working Spinning Machine vibrates whenDoor will not open Light has gone out Spinning starts late orAlways insist on genuine spare parts 0870 0105/06 132 981