ATTENTION!
If you turn the programme selector dial to another programme when the machine is working, all the lights of the programme progress display will flash for about 2 seconds but the machine will not perform the new selected programme.
•An alarm code indicates a fault in the machine operation (see page 28, "Something Not Working")
E20
10 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme light up.
After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.
When the washing or drying programme has finished, the “End” light comes on and a flashing zero appears on the display. The light of the ‘Start/Pause is off.
Prewash
Wash
Rinse
Rinse hold
Drain
Spin
Drying
End
14