John Lewis JLBIWM 1402 Select the Delay start, Select the spin speed or None option

Page 10

machine on. The Start/Pause light starts to flash and the display shows the duration of the selected programme.

To switch the appliance off turn it to “Off”.

 

30 Minute wash

Off

90°

Cottons

 

 

Spin

 

Economy 60°

 

 

Drain

 

60°

 

 

 

Rinse

 

Economy 40°

 

2.05

 

Soak

 

40°

 

Wool

Cold

 

30°

 

30°

 

60°

Synthetics

Hand wash

 

Economy 40°

 

Delicates 30°

 

40°

 

 

 

Delicates 40°

 

30°

 

 

If you wish the laundry to undergo an extra rinse, select the “Extra Rinse” option.

If you do not want your laundry to be creased, select the “Rinse hold” option to leave the fabrics in the water of the last rinse. The relevant light illuminates.

Select the “Delay start”

Before you start the programme, if you wish the start to be delayed, press the “Delay Start” button repeatedly, or keep it pressed, to select the desired delay.

Select the desired programme/temperature

Turn the selector dial to the desired position (Cottons 90° in this case). The display will show the duration of the selected programme, calculated on the basis of the maximum load for each type of fabric. The Start/Pause button light will start flashing.

Delay start

Wash time

The selected delay time value (up to 20 hours) will appear on the display for a few seconds, then the duration of the programme will appear again.

If your laundry needs a soak time, turn the programme selector dial to “Soak” and then, before starting a washing cycle, drain the water as described in the “Soak” paragraph.

Select the spin speed or “None” option

Press this button repeatedly in order to select the desired spin speed or the “None” option.

 

 

 

The relevant light will light

 

 

 

 

1400

 

up.

 

900

 

 

 

700

 

 

 

500

 

 

 

None

 

 

 

Spin

 

 

 

 

 

 

 

 

 

 

Select the desired options

If your laundry has heavy stains and it is necessary to prolong the washing time, select the “Stain” option.

 

 

 

The special detergent for

 

 

 

 

 

 

stains (Stain remover) is

 

Rinse hold

 

loaded from the compart-

 

Stain

 

ment marked

.

 

Option Prewash Quick

 

If your laundry is very

 

 

 

dirty, it may be advisable

 

 

 

to select the “Prewash

 

 

 

option.

 

 

 

 

If your laundry is only

 

 

 

lightly soiled, select the “Quick” option.

Start the programme

Press the “Start/Pause” button. The relevant green light will stop flashing. If you have chosen a delayed start, the washing machine will begin the countdown. The display will show the duration of the programme or the selected delay.

How to change an option or a programme during its cycle

It is possible to change some options before the programme carries it out. Before you make any change, you must pause the washing machine by pressing the “Start/Pause” button.

Changing a running programme is possible only by resetting it. Turn the programme selector dial to «Off» and then to the new programme position.

Start the new programme by depressing the

Start/Pause” button. The washing water in the tub will not be emptied out.

How to interrupt a programme

Press the “Start/Pause” button to interrupt a programme which is running, the corresponding light starts to flash. Press it again to restart the programme.

How to open the door during the cycle of a programme

You can open the door, after having set the washing machine to Pause, provided the following conditions exist:

The washing machine is not in the heating phase beyond 55°C;

10

Image 10
Contents Jlbiwm Child safety InstallationUse Ecological hints Maintenance and cleaning ServiceMaterials marked with the symbol are recyclable Environmental informationContents Detergent dispenser drawer Child safety featureDescription of the appliance Prewash Main wash Fabric softenerProgramme options buttons Control panelProgramme selector dial Spin buttonExtra rinse button Prewash buttonQuick button Display Wash timeStart/Pause button Delay start buttonDoor lock light First use Select the spin speed or None option Select the Delay startHow to interrupt a programme Select the desired optionsRemove the laundry from the washing machine End of programmeAfter a few minutes, you can open the door Leave the door ajar in order to air the washing machineSheet Hints & tips on washing1000g = 1 kg Bath robeWash care symbols Important notesWashing programmes Description Off / ResetProgramme Consumptions SoakMaintenance and cleaning Remove any objects from the pump impeller by rotating it Cleaning the water inlet filterEmergency emptying out Screw the pump cover fullySomething not working Spinning Green Start/Pause lightMachine vibrates when Door will not openInstallation Technical specificationsPositioning Installation on a suspended floorUnpacking PlumbingAppliance must be connected to a cold water supply Water inletWater drainage Into a drainage standpipeInterest of the environment LevellingOnto a sink outlet spigot Permanent connection Electrical connectionBlue- Neutral Brown- Live Preparation and assembly of the door Building-inStrip of beading approximately 605 mm W, x 5 mm Repairs After sales service 0870 01132 963 34/08

JLBIWM 1402 specifications

The John Lewis JLBIWM 1402 is a versatile built-in microwave that brings convenience and efficiency to modern kitchens. Designed with a sleek aesthetic, this appliance perfectly blends into any cabinetry, offering both functionality and style. Its compact size allows it to fit seamlessly into limited spaces while providing ample cooking capabilities.

One of the standout features of the JLBIWM 1402 is its 25-liter capacity, which provides sufficient space for a variety of cooking tasks. Whether reheating leftovers or preparing meals from scratch, this microwave caters to different culinary needs. The appliance boasts a 900-watt microwave power output, ensuring quick and even cooking results.

The JLBIWM 1402 is equipped with multiple power levels, allowing users to tailor their cooking experience according to specific requirements. This flexibility is particularly advantageous when dealing with different types of food that require varying cooking conditions. The intuitive control panel features a digital display, making it easy to monitor and adjust cooking times or settings.

This microwave also includes a selection of pre-set programs for popular dishes, which simplifies the cooking process for users who may not be familiar with microwave timings. This feature takes the guesswork out of meal preparation, ensuring that dishes come out perfectly every time.

In terms of safety, the JLBIWM 1402 has several features that prioritize user well-being. For instance, the child lock function prevents unauthorized use, which is especially useful for families with young children. Additionally, the appliance includes an automatic shutdown feature that kicks in if it detects overheating, further enhancing safety during operation.

The design of the JLBIWM 1402 is not only visually appealing but also functional. Its easy-clean interior ensures that spills and splatters can be wiped away effortlessly, maintaining hygiene and cleanliness. The appliance's energy efficiency ratings suggest that it operates with minimal energy consumption, making it both an eco-friendly and cost-effective choice over time.

Overall, the John Lewis JLBIWM 1402 is a reliable built-in microwave that incorporates a range of technologies and features designed to make cooking easier and more efficient. Its combination of power, versatility, and safety makes it an excellent choice for any kitchen, catering to both novice cooks and seasoned chefs alike.