●An alarm code
E20
This is indicated by the message Err for about 2 seconds when a function incompatible with the current programme is selected.
It indicates a fault with the machine (see the relevant chapter).
programme and before you press the Start/Pause button.
•Select the programme and the required options.
•Select the delay start.
•Press Start/Pause button: the machine starts its hourly countdown.
The programme will start after the selected delay has expired.
Cancelling the delayed start after having started the programme
• | Press Start/Pause button. |
• Press “Delay start” button once until the symbol | |
| «0’» is displayed. |
8 Start/Pause button
To start the selected programme, press the Start/Pause button; the green pilot light stops flashing.
If you have selected a delay time, the countdown will begin and will be shown on the display.
To interrupt a programme which is running, press the Start/Pause button: the green pilot light starts to flash.
To restart the programme from the point at which it was interrupted, press the Start/Pause button
again.
If an incorrect option is selected, an integrated red pilot light of the Start/ Pause button flashes 3 times the message Err is displayed for a few seconds.
Important! You must set the washing machine to Pause before you make any change in the programme in progress.
9 Delay start button
The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this button.
Before you start the programme, if you wish to delay the start, press the Delay Start button repeatedly, to select the desired delay.
The selected delay time value (up to 20 hours) will appear on the display for a few seconds, then the duration of the programme will appear again.
You can cancel the delay time at any moment, before you press the Start/Pause button.
Selecting the delayed start
You must select this option after you have set the
• Press “Start/Pause button again. |
The Delay Start cannot be selected with “Drain” programme.
Important!
The door will be locked throughout the delay time. If you wish to add laundry in the machine during the delay time you must first set the washing machine to Pause by pressing the Start/Pause button. After you have closed the door, press the Start/Pause button again.
10 Door lock light
This pilot light illuminates to indicate that the appliance starts operating and the door is locked.
Door lock
Start/Pause
It stays on during the whole programme. When this light goes out, the door can be opened.
This pilot light indicates if the door can be opened:
•Light on: the door cannot be opened. The appliance is running.
•Light off: the door can be opened. The washing programme is finished.
When you PAUSE the cycle, it becomes possible to open the door, provided:
•The washing machine is not in the heating phase;
•The level of the water is not high;
If all these requirements are met, the “Door lock” light goes off.
8