The control panel
| 30 Minute wash | Off |
| Spin |
|
| Drain |
|
| Rinse |
|
| Soak |
|
Wool | Cold |
|
30° |
| |
|
| |
| Hand wash |
|
| Delicates 30° |
|
| Delicates 40° |
|
1
90° Economy 60° 60° Economy 40° 40° 30° 60°
Economy 40° 40° 30°
SyntheticsCottons
Delay start
Wash time
1400
900
700Rinse hold
500 |
|
|
|
|
| Door lock | |
None | Stain |
|
|
|
|
|
|
Spin | Option | Prewash | Quick | Extra rinse |
| Start/Pause |
|
Child lock |
|
|
|
|
|
| |
2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 10 |
1 Programme selector dial
The programme selector dial is divided into the following sections:
•Cottons,
•Synthetics,
•Delicates
•Wool / Hand washing
•Special programmes from “Soak” to “30 Minute wash”
your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up.
Spin speed
The following speeds are available for the different fabrics:
• | Cottons, linen: |
| 500/700/900 max 1400 r.p.m. ; |
• Synthetics and Wool/Hand wash: | |
| 500/700 max 900 r.p.m.; |
• Reset/Off programme Off
| 30 Minute wash | Off | 90° | Cottons |
| Spin |
| Economy 60° | |
| Drain |
| 60° |
|
| Rinse |
| Economy 40° |
|
| Soak |
| 40° |
|
Wool | Cold |
| 30° |
|
30° |
| 60° | Synthetics | |
Hand wash |
| Economy 40° | ||
| Delicates 30° |
| 40° |
|
| Delicates 40° |
| 30° |
|
The selector dial can be turned either clockwise or anticlockwise.
“Economy” position corresponds to an
ENERGY SAVING programme and “Cold” to a cold wash.
• Delicates and “30 Minute wash”: |
500 max 700 r.p.m. |
Position “None”
By selecting the option “None” all the spinning phases are cancelled and the last rinse water is drained.
If you select this option with programmes for cotton, synthetics and delicates, the machine will perform some extra rinses.
Before setting the dial to
any position ensure that the machine is turned to the “Off” position.
Important! At the end of the programme the selector dial must be turned to position “Off”, to switch the machine off.
Attention!
If you turn the programme selector dial to another programme when the machine is working, the red Start/Pause pilot light will flash 3 times and the message Err is displayed on the display to indicate a wrong selection. The machine will not perform the new selected programme.
Programme options buttons
Depending on the programme, different options can be selected together. These must be selected after choosing the desired programme and before depressing the “Start/Pause” button.
When these buttons are pressed, the corresponding pilot lights illuminate. When they are pressed again, the pilot lights go out.
If an option which is not compatible with the set wash programme is selected, the red Start/Pause light flashes 3 times and the message Err is displayed for about 2 seconds.
2 Spin button
Press this button repeatedly to change the spin speed or to select position “None” (no spin), if you want
3 Option button
Press this button repeatedly, to select only one of the following options:
6