Husqvarna DWF-7589, DWF-8089 instruction manual HOW to Clean the Filter, Cleaning the Lint Filter

13

HOW TO CLEAN THE FILTER

Cleaning the Lint Filter

1Pull the Fiter frame up- ward.

2Turn the lint filter inside fout, wash to the lint of with water

3Return the filter as it was, and insert the filter frame into the slot

Lint Filter Filter Frame

Cleaning the water inlet filter

•Clean the filter when water leaks from, the water inlet.

1Pull the power plug out before cleaning it.

2Turn off the water supply to the washer and sperate the inlet hose.

3Pull the inlet filter out.

4Remove the dirt from the inlet filter with a brush.

Cleaning the drain filter

•In case "Pump-Model" drain hose, this filter’s equipped at the back side of washer.

•This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...

•If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could be caused.

1Put down the remained	2Turn the cap counter		3Pull out the filter
water in the hose. And	clockwise.		assembly.
put a container under the
filter to collect water .			FILTER
			CASE
		CAP
FILTER CONTAINER			CAP
4Clean the drain filter.	5Put in the filter along the		6Turn the cap clockwise
	guiding prominence of		tightly.
	the case. Please note the
	left position of the filter
CAP	adjusting the groove to
	the guide rib.	CASE
	FILTER	GUIDE	CAP
		RIB
	CAP
		SUIT

13