4
INSTALLATION INSTRUCTIONS
Location of washer
Check location where washer will be installed. Make sure you have everything necessary for correct installation.
Proper installation is your responsibility.
•Do not place or store your washer below 0 °C (32°F) to avoid any damage from freezing.
•Install the washer on the horizontal solid floor.
C
B
A
UP 
DOWN
If the washer is installed on an unsuitable floor, it could make considerable noise, vibrate and cause a malfunction. If washer is not level, adjust the front leg(A) up or down for horizontal setting.
•Earthed electrical outlet(B) is required with 20cm of bottom back of washer cabinet.
•Hot and cold water faucets (C) must be within 1M of the upper back of the washer cabinet and provide water pressure 0.3kgf/cm
Drain system
Never forget to install drain hose before operating your washer.
The packing box is opened, there are a drain hose, and a hose clamp in the washer.
| Pump Model |
|
|
• Connect the drain hose to the drain outlet | • Connect the drain hose to the drain outlet |
at the back side of the washer, and fasten | at the back side of the washing machine, |
it tightly with the clamp attached. | and fasten it tightly with the clamp |
| supplied. |
Hose clamp Drain hose
Drain Outlet
Drain hose 
Hose Clamp
NOTES
•The opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
4