JVC LT-26A61BJ, LT-26A61SJ, LT-32A61BJ, LT-32A61SJ manual „ Poor sound

Page 100

Troubleshooting

•Videotaping teletext is not recommended because it may not record correctly.

•When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the TV.

•Since this TV is designed to make full use of the resolution of the original video source, the motion may appear unnatural when the video source is input with progressive-scanning component signals. If this occurs, change the output setting of the connected device to interlace- scanning component signal output. See the instructions that came with the device for more information.

„Poor sound

•Have you adjusted BASS or TREBLE properly? If not, follow the description “BASS” or “TREBLE” on page 28.

•When TV channel reception is poor, it can be hard to hear stereo or bilingual sound. In this case, follow the description “STEREO / I • II” on page 28 to hear the sound more easily by changing it to a mono sound.

„If the TV does not respond to the remote control

•Have the batteries of the remote control worn out? Follow the description “Putting the batteries into the remote control” on page 7 and replace them with new batteries.

•Have you attempted to use the remote control from the sides or rear of the TV or from more than seven metres away from the TV? Use the remote control in front of your TV or from less than seven metres away.

•When you are viewing a teletext programme, you cannot operate the menus. Press the bbutton to return to the ordinary TV programme, and then try operating the menus.

•If the TV suddenly stops responding, disconnect the power cord of the TV from the AC outlet. Connect them to the AC outlet again to turn on the TV. If the TV returns to a normal state, it is not a failure.

„Other issues

•When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the #(standby) button to turn on the TV once again. If the TV goes back to normal, there is no problem.

•When the TV is receiving a wide-screen signal (WSS) or a signal from an external device affecting the screen size, the ZOOM mode automatically changes. When you want to resume the previous ZOOM mode, press the cbutton again.

•It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a fault. This is the time needed for the image to stabilize before it can be displayed.

•The TV may make a crackling sound due to a sudden change in temperature. The picture or sound may be normal. If you hear crackling sounds frequently while you are viewing the TV, there may be other causes. As a precaution, ask your service technician to inspect it.

ENGLISH

47

Page 99 Page 101
Image 100
Page 99 Page 101
Contents LT-32A61BJ LT-32A61SJ LT-26A61BJ LT-26A61SJ How to replace the fuse „ Warning„ If in doubt consult a competent electrician „ Guidelines for safe operationPixel defects Distance recommendations„ Cleaning the screen Do not block the TV’s ventilation openings or holesContents Setting up your TV InstallationUsing the stand „ Rotate the TV to the left and rightRemoving the terminal cover Connecting the aerial and video cassette recorder VCR Connecting the power cord to the AC outlet Putting the batteries into the remote controlInitial settings Press the # button on the remote controlPress the a button Press the a button to display the T-V Link menu If you do not have a T-V Link compatible VCR connectedLink functions „ Downloading the data to VCRTurn on the VCR Press the a button To use T-V Link functions„ Pre-set download When Feature not Available is displayed„ Direct Rec Turn the TV on from standby mode TV buttons and functionsChoose a TV channel Watch images from external devicesAdjust the volume Using the MenuPress the r Volume q buttons Use the MENU/OK buttonTurn the TV on or off from Standby mode Remote control buttons and functionsPress the # standby button to turn TV on or off To return to a TV channel Choose a TV channel and watch images from external devicesTo use the programme number PR 0 AV Press the r q buttons to adjust the volume Information functionChannel number display Time display„ Choose the Zoom mode Zoom functionZoom Press the c button to display the Zoom menuReturn to TV channel instantly „ Adjusting the visible area of the picture3D Sound function „ Setting the picture effect Favourite channel function„ Favourite channel registration „ Calling the favourite channelSet the VCR/TV/DVD Switch to the VCR or DVD position Operating a JVC brand VCR or DVD playerUsing the List Mode Press B button to go into the List modeTeletext function Basic operationSub-page RevealHold SizeCancel Press H Cancel buttonIndex Press the G Index buttonUsing the TV’s menu Buttons used to operate the menusPress the Hbutton to display the menu bar Types of menu Picture menuPicture Mode Picture menuChoose Colour SYSTEM. Then press the a or 3 button NtscPress the 6 buttons to choose a Zoom mode Choose 43 Auto Aspect then press the a buttonSound menu Stereo / IFeatures menu Choose Sleep TIMER. Then press the a or 3 buttonTo cancel the Sleep Timer function „ To set the Child Lock function„ To view a locked TV channel Favourite Setting Choose Favourite SETTING, then press the a or 3 buttonSET UP menu Choose Auto PROGRAM, then press the a or 3 button„ Basic operation Choose EDIT/MANUAL, then press the a or 3 button„ ID Press the 6 buttons to choose a characterTo cancel the Insert function Other TV channelsDisplay the SET UP menu and choose Decoder EXT-2 To cancel the Decoder EXT-2 functionPress the a button to complete the setting Press the green or red button to search for a TV channel„ S-IN S-VIDEO input Choose EXT SETTING, then press the a or 3 buttonPreparation Press the 5 buttons to choose the arrow from the menu Press the 5 or 6 buttons to choose an EXT terminalEXT-1/EXT-3 SET UP menu Before connecting anything Connecting external equipmentAdditional preparation Without terminal covers „ Connecting headphones „ Video or sound signal output from the EXT-2 terminal„ Connecting to the computer „ T-V Link compatible VCR„ Connecting to the Hdmi or DVI compatible device When a picture is not displayedCH/CC numbers ChannelCH/CC numbers Troubleshooting „ If you cannot turn on the TV„ If you cannot turn off the TV „ No picture or no sound„ Other issues „ If the TV does not respond to the remote control„ Poor sound Troubleshooting Cable management Specifications We may change the design and specifications without noticeLT-32A61BU LT-32A61SU LT-26A61BU LT-26A61SU LCD TVEnglish „ Cleaning the screen Contents Setting up your TV Removing the terminal cover Connecting the aerial and video cassette recorder VCR Connecting the power cord to the AC outlet Press the a button Press the a button to display the T-V Link menu Link functions When Feature not Available is DisplayedPress the a button again Power lamp goes off Adjust the volume Remote control buttons and functions TV mode EXT modes Adjust the volume Use to view a normal picture 43 aspect Return to TV channel instantly Favourite channel function Operating a JVC brand VCR or DVD player Teletext function Press the B button again Index Choose to set the screen D0106settings Picture menu Features „ 43 Auto Aspect Sound menu To cancel the Sleep Timer FunctionAppearance Favourite Setting SET UP Auto Program EDIT/MANUAL Language DECODEREXT-2 „ Move „ ID „ Manual Language EXT Setting „ Dubbing SET UP menu Additional preparation Without terminal covers „ T-V Link compatible VCR „ Connecting to the Hdmi or DVI compatible device CH/CC numbers CH/CC numbers Troubleshooting „ Poor sound Troubleshooting Cable management Model LT-32A61BU/LT-32A61SU LT-26A61BU/LT-26A61SU
Top Page Image Contents