PICTURE menu
COOL:
A bluish white. Using this mode when watching bright pictures allows you to enjoy a more vivid and bright picture.
NORMAL:
The normal white colour.
WARM:
A reddish white. Using this mode when watching films allows you to enjoy colours that are characteristic of films.
COLOUR SYSTEM
The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.
1Choose COLOUR SYSTEM. Then press the a or 3 button
The
>> COLOUR SYSTEM
FEATURES
Choose FEATURES and press the a or 3 button to display the
> FEATURES
DIGITAL VNR | AUTO(LOW) |
COLOUR SYSTEM 4:3 AUTO ASPECT
OK
DIGITAL VNR
The DIGITAL VNR function cuts down the amount of ‘noise’ (‘snow’ or interference) in the original picture.
ON:
This function is turned on.
OFF:
This function is turned off.
AUTO
OK
2Press the 6 buttons to choose the appropriate colour system. Then press the a button
PAL:
PAL system
SECAM:
SECAM system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43:
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or an EXT terminal.
•The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.
•When in the Programme numbers PR 0 (AV) to PR 99, you cannot choose NTSC 3.58 or NTSC 4.43.
•COLOUR SYSTEM cannot be chosen when you are watching the PC picture.
26