JVC LT-26A61BJ manual „ Cleaning the screen, Do not block the TV’s ventilation openings or holes

Page 4

Failure to take the following precautions may cause damage to the television or remote control.

DO NOT block the TV’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

DO NOT place anything on top of the TV.

(such as cosmetics or medicines, flower vases, potted plants, cups, etc.)

DO NOT allow objects or liquid into the cabinet openings.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

DO NOT place any naked flame sources, such as lighted candles, on the TV. DO NOT subject the TV to direct sunlight.

The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.

If there is a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.

„Cleaning the screen

The screen is coated with a special thin film to reduce reflection. If this film is damaged, uneven colors, discoloration, scratches, and other problems that cannot be repaired may occur. Pay attention to the following when handling the screen.

Do not use glue or adhesive tape on the screen.

Do not write on the screen.

Do not allow the screen to come in contact with any hard objects.

Do not allow condensation to form on the screen.

Do not use alcohol, thinner, benzene or other solvents on the screen.

Do not rub the screen hard.

CAUTION:

Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit.

Avoid damaging the AC plug and power cord.

When you are not using this unit for a long period of time, it is recommended that you disconnect the power cord from the main outlet.

2

Image 4
Contents LT-32A61BJ LT-32A61SJ LT-26A61BJ LT-26A61SJ How to replace the fuse „ Warning„ If in doubt consult a competent electrician „ Guidelines for safe operationPixel defects Distance recommendations„ Cleaning the screen Do not block the TV’s ventilation openings or holesContents Setting up your TV InstallationUsing the stand „ Rotate the TV to the left and rightRemoving the terminal cover Connecting the aerial and video cassette recorder VCR Connecting the power cord to the AC outlet Putting the batteries into the remote controlInitial settings Press the # button on the remote controlPress the a button Press the a button to display the T-V Link menu If you do not have a T-V Link compatible VCR connectedLink functions „ Downloading the data to VCRTurn on the VCR Press the a button To use T-V Link functions„ Pre-set download When Feature not Available is displayed„ Direct Rec Turn the TV on from standby mode TV buttons and functionsChoose a TV channel Watch images from external devicesAdjust the volume Using the MenuPress the r Volume q buttons Use the MENU/OK buttonTurn the TV on or off from Standby mode Remote control buttons and functionsPress the # standby button to turn TV on or off To return to a TV channel Choose a TV channel and watch images from external devicesTo use the programme number PR 0 AV Press the r q buttons to adjust the volume Information functionChannel number display Time display„ Choose the Zoom mode Zoom functionZoom Press the c button to display the Zoom menuReturn to TV channel instantly „ Adjusting the visible area of the picture3D Sound function „ Setting the picture effect Favourite channel function„ Favourite channel registration „ Calling the favourite channelSet the VCR/TV/DVD Switch to the VCR or DVD position Operating a JVC brand VCR or DVD playerUsing the List Mode Press B button to go into the List modeTeletext function Basic operationSub-page RevealHold SizeCancel Press H Cancel buttonIndex Press the G Index buttonUsing the TV’s menu Buttons used to operate the menusPress the Hbutton to display the menu bar Types of menu Picture menuPicture Mode Picture menuChoose Colour SYSTEM. Then press the a or 3 button NtscPress the 6 buttons to choose a Zoom mode Choose 43 Auto Aspect then press the a buttonSound menu Stereo / IFeatures menu Choose Sleep TIMER. Then press the a or 3 buttonTo cancel the Sleep Timer function „ To set the Child Lock function„ To view a locked TV channel Favourite Setting Choose Favourite SETTING, then press the a or 3 buttonSET UP menu Choose Auto PROGRAM, then press the a or 3 button„ Basic operation Choose EDIT/MANUAL, then press the a or 3 button„ ID Press the 6 buttons to choose a characterTo cancel the Insert function Other TV channelsDisplay the SET UP menu and choose Decoder EXT-2 To cancel the Decoder EXT-2 functionPress the a button to complete the setting Press the green or red button to search for a TV channel„ S-IN S-VIDEO input Choose EXT SETTING, then press the a or 3 buttonPreparation Press the 5 buttons to choose the arrow from the menu Press the 5 or 6 buttons to choose an EXT terminalEXT-1/EXT-3 SET UP menu Before connecting anything Connecting external equipmentAdditional preparation Without terminal covers „ Connecting headphones „ Video or sound signal output from the EXT-2 terminal„ Connecting to the computer „ T-V Link compatible VCR„ Connecting to the Hdmi or DVI compatible device When a picture is not displayedCH/CC numbers ChannelCH/CC numbers Troubleshooting „ If you cannot turn on the TV„ If you cannot turn off the TV „ No picture or no sound„ Other issues „ If the TV does not respond to the remote control„ Poor sound Troubleshooting Cable management Specifications We may change the design and specifications without noticeLT-32A61BU LT-32A61SU LT-26A61BU LT-26A61SU LCD TVEnglish „ Cleaning the screen Contents Setting up your TV Removing the terminal cover Connecting the aerial and video cassette recorder VCR Connecting the power cord to the AC outlet Press the a button Press the a button to display the T-V Link menu Link functions When Feature not Available is DisplayedPress the a button again Power lamp goes off Adjust the volume Remote control buttons and functions TV mode EXT modes Adjust the volume Use to view a normal picture 43 aspect Return to TV channel instantly Favourite channel function Operating a JVC brand VCR or DVD player Teletext function Press the B button again Index Choose to set the screen D0106settings Picture menu Features „ 43 Auto Aspect Sound menu To cancel the Sleep Timer FunctionAppearance Favourite Setting SET UP Auto Program EDIT/MANUAL Language DECODEREXT-2 „ Move „ ID „ Manual Language EXT Setting „ Dubbing SET UP menu Additional preparation Without terminal covers „ T-V Link compatible VCR „ Connecting to the Hdmi or DVI compatible device CH/CC numbers CH/CC numbers Troubleshooting „ Poor sound Troubleshooting Cable management Model LT-32A61BU/LT-32A61SU LT-26A61BU/LT-26A61SU