JVC LT-26A61SJ „ Poor sound, „ If the TV does not respond to the remote control, „ Other issues

Page 49

Troubleshooting

•Videotaping teletext is not recommended because it may not record correctly.

•When viewing images from commercially available video software products, or videos from videotapes which have been recorded improperly, the top of the image may be distorted. This is due to the condition of the video signal. There is nothing wrong with the TV.

•Since this TV is designed to make full use of the resolution of the original video source, the motion may appear unnatural when the video source is input with progressive-scanning component signals. If this occurs, change the output setting of the connected device to interlace- scanning component signal output. See the instructions that came with the device for more information.

„Poor sound

•Have you adjusted BASS or TREBLE properly? If not, follow the description “BASS” or “TREBLE” on page 28.

•When TV channel reception is poor, it can be hard to hear stereo or bilingual sound. In this case, follow the description “STEREO / I • II” on page 28 to hear the sound more easily by changing it to a mono sound.

„If the TV does not respond to the remote control

•Have the batteries of the remote control worn out? Follow the description “Putting the batteries into the remote control” on page 7 and replace them with new batteries.

•Have you attempted to use the remote control from the sides or rear of the TV or from more than seven metres away from the TV? Use the remote control in front of your TV or from less than seven metres away.

•When you are viewing a teletext programme, you cannot operate the menus. Press the b button to return to the ordinary TV programme, and then try operating the menus.

•If the TV suddenly stops responding, disconnect the power cord of the TV from the AC outlet. Connect them to the AC outlet again to turn on the TV. If the TV returns to a normal state, it is not a failure.

„Other issues

•When the SLEEP TIMER function operates, the TV is automatically turned off. If the TV suddenly turns off, try to press the #(standby) button to turn on the TV once again. If the TV goes back to normal, there is no problem.

•When the TV is receiving a wide-screen signal (WSS) or a signal from an external device affecting the screen size, the ZOOM mode automatically changes. When you want to resume the previous ZOOM mode, press the cbutton again.

•It takes a short period of time from the time an operation such as changing channels is performed until an image is displayed. This is not a fault. This is the time needed for the image to stabilize before it can be displayed.

•The TV may make a crackling sound due to a sudden change in temperature. The picture or sound may be normal. If you hear crackling sounds frequently while you are viewing the TV, there may be other causes. As a precaution, ask your service technician to inspect it.

47

Page 48 Page 50
Image 49
Page 48 Page 50
Contents LT-32A61BJ LT-32A61SJ LT-26A61BJ LT-26A61SJ „ Warning How to replace the fuse„ If in doubt consult a competent electrician „ Guidelines for safe operationDistance recommendations Pixel defectsDo not block the TV’s ventilation openings or holes „ Cleaning the screenContents Installation Setting up your TVUsing the stand „ Rotate the TV to the left and rightRemoving the terminal cover Connecting the aerial and video cassette recorder VCR Putting the batteries into the remote control Connecting the power cord to the AC outletInitial settings Press the # button on the remote controlPress the a button If you do not have a T-V Link compatible VCR connected Press the a button to display the T-V Link menu„ Downloading the data to VCR Link functionsTurn on the VCR Press the a button To use T-V Link functions„ Pre-set download When Feature not Available is displayed„ Direct Rec TV buttons and functions Turn the TV on from standby modeChoose a TV channel Watch images from external devicesUsing the Menu Adjust the volumePress the r Volume q buttons Use the MENU/OK buttonTurn the TV on or off from Standby mode Remote control buttons and functionsPress the # standby button to turn TV on or off To return to a TV channel Choose a TV channel and watch images from external devicesTo use the programme number PR 0 AV Information function Press the r q buttons to adjust the volumeChannel number display Time displayZoom function „ Choose the Zoom modeZoom Press the c button to display the Zoom menuReturn to TV channel instantly „ Adjusting the visible area of the picture3D Sound function Favourite channel function „ Setting the picture effect„ Favourite channel registration „ Calling the favourite channelOperating a JVC brand VCR or DVD player Set the VCR/TV/DVD Switch to the VCR or DVD positionPress B button to go into the List mode Using the List ModeTeletext function Basic operationReveal Sub-pageHold SizePress H Cancel button CancelIndex Press the G Index buttonButtons used to operate the menus Using the TV’s menuPress the Hbutton to display the menu bar Types of menu Picture menuPicture menu Picture ModeNtsc Choose Colour SYSTEM. Then press the a or 3 buttonChoose 43 Auto Aspect then press the a button Press the 6 buttons to choose a Zoom modeStereo / I Sound menuChoose Sleep TIMER. Then press the a or 3 button Features menuTo cancel the Sleep Timer function „ To set the Child Lock function„ To view a locked TV channel Choose Favourite SETTING, then press the a or 3 button Favourite SettingChoose Auto PROGRAM, then press the a or 3 button SET UP menuChoose EDIT/MANUAL, then press the a or 3 button „ Basic operationPress the 6 buttons to choose a character „ IDOther TV channels To cancel the Insert functionTo cancel the Decoder EXT-2 function Display the SET UP menu and choose Decoder EXT-2Press the a button to complete the setting Press the green or red button to search for a TV channel„ S-IN S-VIDEO input Choose EXT SETTING, then press the a or 3 buttonPreparation Press the 5 buttons to choose the arrow from the menu Press the 5 or 6 buttons to choose an EXT terminalEXT-1/EXT-3 SET UP menu Before connecting anything Connecting external equipmentAdditional preparation Without terminal covers „ Video or sound signal output from the EXT-2 terminal „ Connecting headphones„ Connecting to the computer „ T-V Link compatible VCRWhen a picture is not displayed „ Connecting to the Hdmi or DVI compatible deviceChannel CH/CC numbersCH/CC numbers „ If you cannot turn on the TV Troubleshooting„ If you cannot turn off the TV „ No picture or no sound„ Other issues „ If the TV does not respond to the remote control„ Poor sound Troubleshooting Cable management We may change the design and specifications without notice SpecificationsLCD TV LT-32A61BU LT-32A61SU LT-26A61BU LT-26A61SUEnglish „ Cleaning the screen Contents Setting up your TV Removing the terminal cover Connecting the aerial and video cassette recorder VCR Connecting the power cord to the AC outlet Press the a button Press the a button to display the T-V Link menu Link functions Displayed When Feature not Available isPress the a button again Power lamp goes off Adjust the volume Remote control buttons and functions TV mode EXT modes Adjust the volume Use to view a normal picture 43 aspect Return to TV channel instantly Favourite channel function Operating a JVC brand VCR or DVD player Teletext function Press the B button again Index Choose to set the screen D0106settings Picture menu Features „ 43 Auto Aspect Sound menu Function To cancel the Sleep TimerAppearance Favourite Setting SET UP Auto Program EDIT/MANUAL Language DECODEREXT-2 „ Move „ ID „ Manual Language EXT Setting „ Dubbing SET UP menu Additional preparation Without terminal covers „ T-V Link compatible VCR „ Connecting to the Hdmi or DVI compatible device CH/CC numbers CH/CC numbers Troubleshooting „ Poor sound Troubleshooting Cable management Model LT-32A61BU/LT-32A61SU LT-26A61BU/LT-26A61SU
Top Page Image Contents