Equipment which can output the S-VIDEO signal (Y/C signal) such as an S-VHS VCR
Connect the equipment to an EXT-2 terminal. You can choose between an S-VIDEO signal (Y/C signal) and a regular video signal (composite signal). For details of how to operate the equipment, see “S-IN (S-VIDEO input)” on page 37.
T-V LINK compatible VCR
Be sure to connect the T-V LINK compatible VCR to the EXT-2 terminal. If not, the T-V LINK function will not work properly.
•When connecting a T-V LINK compatible VCR to the EXT-2 terminal, be sure to connect the decoder to the VCR. If not, the T-V LINK function may not work properly.
•When you connect the decoder to the VCR, after you have stored TV channels in the programme numbers (PR) list, set the DECODER (EXT-2) function for the programme number (PR) to ON to unscramble a scrambled TV channel. For details, see “DECODER (EXT-2)” on page 36.
Connecting headphones
Connect the headphones with a stereo mini- jack (3.5 mm diameter) to the headphone socket at the TV rear panel.
•No sound comes from the TV speakers when the headphones are connected.
Video or sound signal output from the EXT-2 terminal
You can change over the output of the video/ sound signal from the EXT-2 terminal. This is useful when you want to dub the video/ sound from another device onto the VCR connected to the EXT-2 terminal. For details on how to do this, see “DUBBING” on page 38.
•The signals from EXT-4 and PC IN terminal cannot be output from EXT-2.
TV output from the EXT-1 terminal
The video/sound signal of a TV channel you are viewing is always output from the EXT-1 terminal.
•Changing over a programme number (PR) also changes over the TV output from the EXT-1 terminal.
•The video/sound signal from an EXT terminal cannot be output.
•Teletext programmes cannot be output.
Connecting to the computer
Connect the D-SUB cable with “DVI-I”-“D- SUB” convert adapter from the computer’s analogue RGB output terminal to the DVI terminal on the back of the TV.
If you want to listen to the sound from the computer, use an audio cable to connect the VIDEO-3 AUDIO L/R sound input terminal to the computer’s sound output terminal. When the sound from the computer is mono, connect to the VIDEO-3 AUDIO L terminal. To watch images from a computer, start the computer and press the Gor ppbuttons to choose “PC”.
•Refer to the computer’s manual for a detailed explanation of the connections at the computer side.
•Ensure that the connectors are facing the correct way when connecting.
•After connecting the D-SUB cable with “DVI-I”-“D-SUB” convert adapter, tighten the two screws to fix the connector in place.
•Digital output with a DVI cable is not supported.
