d
How to Install the Washing Machine
■■Make sure that the union nut between the water supply hose and main unit is tightly screwed.
■■Turn the tap on to check if the water supply hose is properly connected before starting. If it is loosely connected, water leakage may occur.
●Drain hose
■■The drain hose should be placed higher than 60 cm above and not higher than 100 cm above the floor.
If the drain outlet is lower than 60 cm, |
|
|
|
a joint pipe is necessary (additional |
|
|
|
part, sold at a specialist outlet). |
|
|
|
|
|
| |
Secure the drain hose to prevent | 60~100 cm |
| |
from slipping out from joint pipe. |
|
|
|
| Joint pipe | ||
■■Do not bend, twist, crush or pull out, bend or step on the drain hose. Use the hose guide to prevent the drain hose from kinking.
■■Do not detach the drain hose from the rear panel of the washing machine.
Drainage into a wash basin (Using the
- Secure the drain hose to prevent it from slipping out of the wash basin.
- The wash basin outlet must not be sealed
by a plug.
- When water is being pumped out of the washing machine, check that the water drains away quickly enough.
Drainage into a siphon :
- Secure the connection point with
25