TIMER button
LCD multi function display
Control Panel and Display
Lets you program a wash to finish up to 24 hours later. The 
symbol is shown on the display.
Child lock: To prevent accidental operation by children, this disables the operation buttons and dial, and also locks the door. Press the TIMER button for 3 seconds to activate this option. The 
symbol is shown on the display. Press TIMER button for 3 seconds again to cancel the child lock. (Remaining time of timer operation is shown instantaneously but disappears after the child lock is set.)
Displays all cycle information, remaining time and error codes.
| TIME | HR |
oC | LEFT | |
r/min |
|
|
Water temperature
The 
symbol is on when the heater is off (Cold setting).
Spin speed
●●‘0 r/min’ (No Spin) : Final spin is cancelled and last rinse water is drained only.
●●‘- -
QUICK option
INTENSIVE option
PREWASH option
EXTRA RINSE option
Progress indicator
Shows which phase of the program is performing.
The following symbols blink when each phase is running, and go off when each phase is completed.
PREWASH
Main Wash
Rinse
SPIN
Child lock option
All buttons are disabled except the POWER button and Jog Dial, and the door is locked when the 
symbol is on.
Door lock
The door is locked when the
symbol is on. 
TIMER option
Remaining time of the program (shows ‘TIME LEFT’), remaining time until timer operation is completed (shows ‘HR’), and error codes. ÆÆPage 21 : Error Codes
8