How to Install the Washing Machine
Connecting the power
Level Adjustment
■■Connect the washing machine to an alternating current via a correctly installed earthed socket only.
■■The mains voltage must correspond to the voltage specification on the washing machine.
■■Connection specifications as well as the required fuses are stipulated on the washing machine nameplate.
■■Do not plug the washing machine into an extension lead or power strip with multiple sockets.
■■All four adjustable feet must be firmly on the ground. The washing machine must not wobble.
■■Check the alignment of the washing machine with a spirit level, and adjust the feet if it’s not aligned.
|
| Loosen the lock nut by | |
Loosening 1 | Lock nut | unscrewing in the arrow | |
| direction 1 then stabilize | ||
Elevating | Adjustable leg | ||
the unit with the adjustable | |||
|
| feet. | |
| Tightening 2 | After adjustment, tighten | |
Lock nut | the lock nut by screwing it | ||
| in the arrow direction 2. | ||
|
| ||
Plastic base plate |
|
| |
| Tighten the lock nut until it | ||
| reaches the plastic base plate. | ||
| Adjustable leg is not over 25 mm. | ||
26