John Lewis JLWM1402 1400 instruction manual Programme information

Page 9

When the programme has finished, the “End” light comes on.

Prewash

Wash

Rinse

Rinse hold

Drain

Spin

Filter

End

The “End” pilot light flashes in the event of operating problems. And the relative alarm code appears on the display.

E10 = the machine does not fill

E20 = the machine does not empty

E40 = the door has not been closed

To eliminate the problem, see paragraph “Something not working”.

ATTENTION!

If you turn the programme selector dial to another programme when the machine is working, all the lights of the programme progress display will flash for about 2 seconds but the washing machine will not perform the new selected programme.

Programme information

Soak 30°

This is a special programme for heavily soiled laundry. The machine performs a soak of about 30 minutes at 30°C. At the end of the soak time the machine will stop automatically with water left in the tub. The display will show a flashing zero.

Pour the detergent for the soak programme into the compartment marked

Before starting a new washing phase, it is necessary to empty the water by selecting the “Drain” programme.

This function cannot be used with Wool programmes.

Rinse

With this programme it is possible to rinse and spin the garments which have been washed by hand. The machine performs 3 rinses, followed by a final long spin at the maximum speed.

The spin speed can be reduced by depressing the “Spin” button.

The final spin is foreseen only for cotton items as in the spin programme.

Softeners

Hand washed garments can be be starched or softened with this programme.

The machine performs 1 rinse, followed by a final long spin at the maximum speed which can be reduced by depressing the “Spin” button.

The final spin is foreseen only for cotton items as in the spin programme.

Drain

For emptying out the water of the last rinse in programmes with the “Quiet” option or “Soak 30°” programme. Turn first the programme selector dial to “Off”, then select the “Drain” programme and depress the “Start/Pause” button.

Spin

Separate long spin at the max speed for hand washed garments. It has to be used for cotton items. You can reduce the speed by means of “Spin” button to adapt it to the fabrics to be spun.

30 Minute wash

This is a complete programme that can be combined with the following options:

Spin” speed reduction, “Quiet” and “Delay start”. To be used for laundry which is lightly soiled or which needs freshening up.

Max. load 2 kg.

Washing temperature 30 C. Programme duration 30 minutes. Final spin speed 700 rpm.

Off = Reset / Switching the machine off

To reset a programme turn the selector dial to “Off”. Now can a new programme be selected.

9

Image 9
Contents JLWM1201 Spin washing machine JLWM1402 Installation Child SafetyUse Contents Ecological hints Materials marked with the symbol are recyclableInterest Environment Machine works more economically if it is fully loadedDescription of the Appliance Child safety featureDoor locked light Detergent dispenser drawerProgramme selector dial Control PanelSpin button Option buttonsSelecting the delayed start Delay start buttonCancelling the delayed start Start/Pause buttonProgramme phase indicator lights DisplayFollowing pieces of information are shown on the display Programme information When the programme has finished, the End light comes onOperating Sequence Switch the machine onLoad the laundry Measure out the detergentHow to change an option or a programme during its cycle Select the Delay startSelect the spin speed or the None option Select the desired optionsHow to interrupt a programme End of programmeLeave the door ajar in order to air the washing machine 1000g = 1 kg Washing HintsSheet Bath robeImportant Notes Wash Care SymbolsWashing programmes Programme Available Consumptions Off / ResetEnergy Water Time Description SoakMaintenance and Cleaning Emergency emptying out Cleaning the water inlet filterRemove any objects from the pump impeller by rotating it Screw the pump cover fully Close the pump doorSomething Not Working Spinning Machine vibrates whenDoor will not open Light has gone outTechnical Specifications Installation InstructionsUnpacking Installation on a Suspended FloorWater drainage Water inletAppliance must be connected to a cold water supply Into a drainage standpipeSpecial conditions LevellingInterest of the environment Onto a sink outlet spigotPermanent connection Electrical connection