John Lewis JLWM 1200 instruction manual Cleaning the drawer recess, Cleaning the pump

Page 19

Cleaning the drawer recess

Having removed the drawer, use a small brush to clean the recess, ensuring that all washing powder residue is removed from the upper and lower part of the recess.

Replace the drawer and run the rinse programme without any clothes in the drum.

Cleaning the pump

The pump should be inspected if:

• the machine does not empty and/or spin;

•the machine makes an unusual noise during draining due to objects such as safety pins,

coins etc. blocking the pump. Proceed as follows:

•disconnect the appliance;

•if necessary wait until the water has cooled down.

•Open the pump door.

•Place a container close to the pump to collect any spillage.

•Pull out the emergency emptying hose, place it in the container and remove its cap.

•When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover.

Image 19

Contents Jlwm Spin washing machine General safety Safety informationUse InstallationKeep all detergents in a safe place out of children’s reach Child safetyContents Product description Rating plate Drain pump Adjustable feetDetergent dispenser drawer Control panelRinse hold Indicator pilot lightProgramme Selector Dial Available options SpinLight End illuminates at the end of the washing cycle First useDaily use Load the laundryMeasure out the detergent and the fabric softener Measure out the detergentRelevant light will light up Select the available options by pressing buttonStart the programme by pressing button Altering an option or a running programmeAt the end of the programme Cancelling a programmeInterrupting a programme Opening the doorRemoving stains Helpful hints and tipsSorting out the laundry Before loading the laundryDegrees of water hardness Quantity of detergent to be usedCottons ECO Washing ProgrammesRinse Consumption values Technical dataCare and cleaning Cleaning the pump Cleaning the drawer recessTurn on the water tap Cleaning the water inlet filtersRemove any objects from the pump impeller by rotating it Screw the pump cover fully Close the pump doorEmergency emptying out Frost precautionUnpacking InstallationPlumbing Positioning and levellingInto a drainage standpipe Water inletWater drainage Inlet hose is screwed to the back of the applianceUse the plastic U Piece supplied Onto a sink outlet spigotInterest of the environment Special conditionsElectrical connection Permanent connection What to do if…Redistribute the laundry End of drain hose is too low 0844 871 Repairs After Sales ServiceRepairs After Sales Service Your appliance comes with a three year warrantyEcological hints Environment concernsSpare parts Packaging materialsPage Page Page 192994591-00-302009