John Lewis JLWM 1200 instruction manual Installation, Use

Page 3

Do not use your washing machine to wash articles with whalebones, material without hems or torn material.

Always unplug the appliance and turn off the water supply after use and during cleaning and maintenance.

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.

Installation

This appliance is heavy. Care should be taken when moving it.

When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre.

All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in the user manual.

After having installed the appliance, check that it is not standing on the inlet and drain hose and the worktop is not pressing the electrical supply cable against the wall.

If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely under the appliance.

Always be sure, that there is no water leakage from hoses and their connections after the installation.

If the appliance is installed in a location subject to frost, please read the “dangers of freezing” chapter.

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Use

This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed.

Only wash and dry fabrics which are designed to be machine washed or dried. Follow the instructions on each garment label

Do not overload the appliance. See the Washing Programme Table.

Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.

Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.

As some duvets and eiderdowns should be washed/dried in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.

The users should always check that they have not left their gas lighters (disposable or otherwise) in their clothing.

Never tumble dry items that have had contact with chemicals such as dry cleaning fluid. These are of a volatile nature and could cause an explosion. Only tumble dry items which have been washed in water or require airing.

3

Image 3
Contents Jlwm Spin washing machine General safety Safety informationUse InstallationKeep all detergents in a safe place out of children’s reach Child safetyContents Product description Rating plate Drain pump Adjustable feetDetergent dispenser drawer Control panelRinse hold Indicator pilot lightProgramme Selector Dial Available options SpinLight End illuminates at the end of the washing cycle First useDaily use Load the laundryMeasure out the detergent and the fabric softener Measure out the detergentRelevant light will light up Select the available options by pressing buttonStart the programme by pressing button Altering an option or a running programmeAt the end of the programme Cancelling a programmeInterrupting a programme Opening the doorRemoving stains Helpful hints and tipsSorting out the laundry Before loading the laundryDegrees of water hardness Quantity of detergent to be usedCottons ECO Washing ProgrammesRinse Consumption values Technical dataCare and cleaning Cleaning the pump Cleaning the drawer recessTurn on the water tap Cleaning the water inlet filtersRemove any objects from the pump impeller by rotating it Screw the pump cover fully Close the pump doorEmergency emptying out Frost precautionUnpacking InstallationPlumbing Positioning and levellingInto a drainage standpipe Water inletWater drainage Inlet hose is screwed to the back of the applianceUse the plastic U Piece supplied Onto a sink outlet spigotInterest of the environment Special conditionsElectrical connection Permanent connection What to do if…Redistribute the laundry End of drain hose is too low 0844 871 Repairs After Sales ServiceRepairs After Sales Service Your appliance comes with a three year warrantyEcological hints Environment concernsSpare parts Packaging materialsPage Page Page 192994591-00-302009