John Lewis JLWM 1200 instruction manual Cleaning the water inlet filters, Turn on the water tap

Page 20

•Remove any objects from the pump impeller by rotating it.

•Put the cap back on the emergency emptying hose and place it back in its seat.

•Screw the pump cover fully in.

•Close the pump door.

Caution! When the appliance is in use and depending on the programme selected there can be hot water in the pump.

Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened so as to stop leaks and young children being able to remove it.

Cleaning the water inlet filters

Warning! If the appliance doesn't fill or it is taking longer to fill with water, check if the water inlet filters are blocked.

1.Turn off the water tap.

2.Unscrew the water inlet hose.

3.Clean the filter using a hard bristle brush.

4.Screw the hose back onto the tap.

5.Unscrew the hose from the machine. Keep a rug nearby because some water may flow.

6.Clean the filter in the valve with a stiff brush or with the piece of cloth.

7.Screw the hose back to the machine and make sure the connection is tight.

8.Turn on the water tap.

20

Image 20

Contents Jlwm Spin washing machine Safety information General safetyInstallation UseChild safety Keep all detergents in a safe place out of children’s reachContents Rating plate Drain pump Adjustable feet Product descriptionControl panel Detergent dispenser drawerIndicator pilot light Programme Selector DialAvailable options Spin Rinse holdFirst use Daily useLoad the laundry Light End illuminates at the end of the washing cycleMeasure out the detergent Measure out the detergent and the fabric softenerSelect the available options by pressing button Start the programme by pressing buttonAltering an option or a running programme Relevant light will light upCancelling a programme Interrupting a programmeOpening the door At the end of the programmeHelpful hints and tips Sorting out the laundryBefore loading the laundry Removing stainsQuantity of detergent to be used Degrees of water hardnessWashing Programmes Cottons ECORinse Technical data Consumption valuesCare and cleaning Cleaning the drawer recess Cleaning the pumpCleaning the water inlet filters Remove any objects from the pump impeller by rotating itScrew the pump cover fully Close the pump door Turn on the water tapFrost precaution Emergency emptying outInstallation UnpackingPositioning and levelling PlumbingWater inlet Water drainageInlet hose is screwed to the back of the appliance Into a drainage standpipeOnto a sink outlet spigot Use the plastic U Piece suppliedSpecial conditions Interest of the environmentElectrical connection What to do if… Permanent connectionRedistribute the laundry End of drain hose is too low Repairs After Sales Service Repairs After Sales ServiceYour appliance comes with a three year warranty 0844 871Environment concerns Spare partsPackaging materials Ecological hintsPage Page Page 192994591-00-302009