If an option which is not compatible with the set wash programme is selected, the red button 8 light flashes 3 times and the message Err is displayed for a few seconds. When the option is set, the relevant light is on.
Select the delay start
Before you start the programme, press this button repeatedly to select the desired delay. The set delay time value (up to 20 hours) will appear on the display for a few seconds, then the duration of the programme will appear again. The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours.
You can cancel the delay time at any moment, before you press the «Start/ Pause» button.
Selecting the delayed start
You must select this option after you have set the programme and before you press the «Start/Pause» button.
•Select the programme and the required options.
•Select the delay start.
•Press button 8: the machine starts its hourly count down. The programme will start after the selected delay has expired.
Opening the door throughout the delay time
If you wish to add laundry in the machine during the delay time
•Press button 8 to put the machine in pause.
•Add the laundry, close the door
•Press 8 button again.
Cancelling the delayed start
•Press button 8.
•Press «Delay start» button once until the symbol «0’» is displayed.
• Press button 8 again.
The Delay Start cannot be selected with the draining programme.
Start the programme
To start the selected programme, press the button 8 ; the green pilot light stops flashing. If you have selected a delay time, the countdown will begin and will be shown on the display.
To interrupt a programme which is running, press button 8: the green pilot light starts to flash. To restart the programme from the point at which it was interrupted, press the button 8 again. If an incorrect option is selected, the red pilot light of button 8 flashes 3 times and the message Err is displayed for a few seconds.
Important!
You must set the washing machine to Pause before you make any change in the programme in progress.
How to change an option or a programme during its cycle
It is possible to change some options before the programme carries them out. Before you make any change, you must pause the washing machine by pressing the button 8. Changing a running programme is possible only by resetting it.
Turn the programme selector dial to «Off» and then to the new programme position. Start the new programme by pressing the button 8. The washing water in the tub will not empty out
14