John Lewis JLWM 1406 Acoustic Signal, «On/Off» / «Reset» programme button, «Temperature» button

Page 7

4.7Wash time message:

It is on when the washing cycle starts and when the duration is shown on the display.

It goes off at the end of the cycle, and during the delayed start selection.

It blinks during the time calculation if you have selected a «proportional» programme.

4.8Quick message: it appears when the QUICK option is selected.

4.9Delay start message: it appears during the selection of the delayed start.

4.10Child safety Lock symbol: it appears when this function is enabled. This function works in two different ways:

If enabled before the «Start/Pause» button is pressed, it prevents the machine from being started.

Buttons (2, 3, 5, 6, 7, 8, 9, 10, 11 and 12)

«On/Off» / «Reset» programme button (2)

Press this button to switch the washing machine on. The green light of button 10 starts blinking. The pilot light relevant to the programme automatically proposed by the appliance lights up. The display goes on and shows some information about the selected programme.

Press this button again to switch the machine off.

Warning!

Always switch off the appliance by pressing button 2. (Cancel programme). This ensures that the new programme begins correctly and all previously set functions are cancelled.

«Programme selector» buttons (3)

Press these buttons repeatedly to select the programme on the basis of the type of laundry to be washed or a special programme. The pilot light relevant to the selected programme lights up. The washing machine proposes a temperature and automatically selects the maximum spin value provided for the

If enabled after pressing the «Start/Pause» button, it prevents any changes being made to the programmes or options selected.

To enable or disable this function, press the «Temperature» and «Spin» buttons simultaneously for approx 6 seconds until the

icon appears on or disappears from the display.

Acoustic Signal

At the end of a washing cycle and in case of operating problems, an acoustic signal will sound.

You can deactivate the acoustic signal (except if there is a fault) by pressing the "Options" and the "Extra rinse" buttons simultaneously for about 5 seconds.

By pressing these buttons again the acoustic signal is reactivated.

programme you have chosen. You can change these values by operating buttons 5 and 6.

The duration of the selected washing programme is shown on the display (4.6).

The display also shows the options compatible with the programme (except Extra rinse, Quick and Delay start).

Warning!

If you press one of these buttons while a wash programme is running, the red pilot light of button 10 blinks three times and Err is displayed to show a wrong selection.

«Temperature» button (5)

Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine (4.1).

Note!

To see the maximum and the minimum temperature provided for each of the washing programmes, see chapter «Washing Programmes».

7

Image 7
Contents Jlwm Spin washing machine Child safety InstallationUse Environmental information Maintenance and cleaning ServiceMaterials marked with the symbol are recyclable Ecological hintsContents Detergent dispenser drawer On/Off and Reset buttonTemperature button Door Lock pilot light Spin speed button Control panelExtra rinse option Spin speed indicator «Rinse hold» and «QUIET» optionsDisplay and buttons Multi-Display«Programme selector» buttons Acoustic Signal«On/Off» / «Reset» programme button «Temperature» button«Quick» button «Spin» button«Options» button «Extra rinse» button«Start/pause» button «Delay start» buttonDoor Lock pilot light Load the laundry Switch the machine on and select the desired programmeSelect the desired temperature and spin speed Select the Delay start optionProgramme correction Cancel a programme or switch the appliance offHow to interrupt a programme End of programmeBath robe Hints & tips on washing1000g = 1 kg SheetImportant notes Wash care symbolsWashing programmes Water draining Programme descriptionLoad Lingerie, underwearFreshening up Main wash rinses Spin at ItemsCan be used for laundry which is Lightly soiled or which needsMaintenance and cleaning Screw the pump cover fully Close the pump door Cleaning the water inlet filterEmergency emptying out Remove any objects from the pump impeller by rotating itSomething not working Door will not open Green Start/Pause lightMachine vibrates when SpinningPrewash Main wash Fabric softener Child safety featureDescription of the appliance Detergent dispenser drawerTechnical specifications Installation«COTTONS ECONOMY» at 60C Plumbing Installation on a suspended floorUnpacking PositioningInto a drainage standpipe Water inletWater drainage Appliance must be connected to a cold water supplyInterest of the environment LevellingOnto a sink outlet spigot Electrical connection Permanent connection Repairs After sales service34/08 132 961