JVC KD-R411 manual Stopping playback and detaching the USB device, Source or detach the USB device

Page 10

Listening to the USB device (For KD-R412/KD-R411/KD-R35)

This unit can play MP3/WMA tracks stored in a USB device.

~

Ÿ

USB input jack

USB memory

 

]Turn on the

 

 

power.

 

 

 

All tracks will be played repeatedly until you change the

 

 

source or detach the USB device.

If a USB device has been attached...

Pressing /SOURCE turns on the power and playback starts from where it has been stopped previously.

•If a different USB device is currently attached, playback starts from the beginning.

Stopping playback and detaching the USB device

Straightly pull it out from the unit.

“NO USB” appears. Press /SOURCE to listen to another playback source.

You can operate the USB device in the same way you operate the files on a disc.

Caution on volume setting:

USB devices produce very little noise compared with other sources. Lower the volume before playing a USB to avoid damaging the speakers by sudden increase of the output level.

Cautions:

•Avoid using the USB device if it might hinder your safety driving.

•Do not pull out and attach the USB device repeatedly while “READING” is shown on the display.

•Do not start the car engine if a USB device is connected.

•This unit may not be able to play the files depending on the type of USB device.

•Operation and power supply may not work as intended for some USB devices.

•You cannot connect a computer to the USB input terminal of the unit.

•Make sure all important data has been backed up to avoid losing the data.

•Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.

•Some USB devices may not work immediately after attaching USB device or turn on the power.

•For more details about USB operations, see page 19.

10

ENGLISH

Page 9 Page 11
Image 10
Page 9 Page 11
Contents KD-R412/KD-R411/ KD-R35/KD-R312/KD-R311 Battery Products For safetyTemperature inside the car European Union onlyContents Turn on the power Canceling the display demonstrationSetting the clock Initial settingButton Basic operationsFor KD-R412 KD-R411/KD-R35 Listening to the radio When an FM stereo broadcast is hard to receiveAutomatic presetting FM Manual searchStandby receptions Manual presetting FM/AMSelecting a preset station TA Standby ReceptionAutomatic station selection Listening to a discTracing the same programme PTY Standby ReceptionSelecting the playback modes To cancel repeat play or random play, selectSelecting a track/folder Selects folder of the MP3/WMA Selects trackSource or detach the USB device Stopping playback and detaching the USB deviceIf a USB device has been attached Listening to the other external components Connecting an external component to the AUX input jackAdjust the volume Mm stereo mini plug not supplied Portable audio player EtcBefore using the remote controller Using the remote controller For KD-R412/KD-R411Installing the lithium coin battery CR2025 Remote sensorSelectable setting, Initial Underlined Selecting a preset sound modeStoring your own sound mode Menu operationsMenu item Selectable setting, Initial Underlined Menu item SUB.W VOL AdjustVOL ADJ +05 RearTuner operations More about this unitBasic operations Disc operationsPlaying an MP3/WMA disc Preset sound mode ToneMaintenance Troubleshooting Symptom Remedy/CauseFile names A limited number of symbolsJoliet Noise is generatedBack in the order you have Wma to non-MP3 or WMA tracksDisplay Folder that contains MP3/WMA tracks Intended Will be the first track/folder for playbackSpecifications Non-contact optical pickup Power Requirement Operating VoltageType Compact disc player Semiconductor laserHaving Trouble with operation? Preparing the remote controller RM-RK50 How to forcibly eject a discPreparations Listening to the external components Storing your own sound mode Menu operationsConnecting the external amplifier or subwoofer Precautions on power supply and speaker connectionsWhen installing the unit without using the sleeve In-dash mountingTuner operations Disc/USB operationsMaintenance SpecificationsBasic operations Setting the clockAdjust the hour Adjust the minute Finish the procedure Select Clock Select Clock SETSpace To cancel the prohibition, repeat the same procedureUsing the remote controller Flat = Natural = Dynamic =Sleeve InstallationRemoving the unit Playing MP3/WMA tracks from a USB device for KD-R414 More about this unitGeneral KD-S27 Hold Move to the next or previous character Display TAG OFF 10.0 kHz, 12.5 kHz 06 to +0615.0 kHz, 17.5 kHz Mono *2More about this unit Prepare this before installation Check the battery system in your carPreparation Precautions on power supply and speaker connections Typical connections
Related manuals
Manual 25 pages 40.64 Kb

GET0624-003A, KD-R35, KD-R411, KD-R311, KD-R312 specifications

JVC has long been known for its commitment to quality audio equipment, and its KD series of car receivers is no exception. The JVC KD-R412, KD-R35, KD-R411, KD-R312, and KD-R311 are models that highlight the brand's focus on delivering robust sound performance coupled with user-friendly features.

The JVC KD-R412 stands out with its impressive playback capabilities. It supports various formats, including CD, CD-R/RW, and USB audio. Users can enjoy the convenience of connecting their smartphones through the front USB port, which also supports high-resolution audio playback. This model also features JVC's powerful MOS-FET amplifier, ensuring that listeners experience dynamic sound with clear highs and deep lows.

The KD-R35 offers a budget-friendly option without compromising on quality. Its 4-channel output, combined with a maximum power of 50 watts, delivers ample power for great sound in any vehicle. The KD-R35 also features Bluetooth connectivity, allowing for hands-free calling and audio streaming. The intuitive interface makes it easy for users to navigate through their favorite playlists while driving.

The KD-R411 is another excellent choice for music lovers. It includes a 3-band equalizer, enabling users to customize their audio to suit their preferences. The model is equipped with a digital clock and has a detachable face for enhanced security. Additionally, it supports dual phone connection, allowing users to easily switch between two devices.

The KD-R312 is recognized for its user-centric features, including a large, easy-to-read display. The model supports both USB and auxiliary input, making it versatile for various audio sources. It also comes with a built-in amplifier that ensures powerful sound output, making it perfect for anyone seeking an upgrade for their car's audio system.

Lastly, the KD-R311 rounds up the series with an emphasis on functionality and simplicity. It presents a clean design, making it ideal for straightforward audio needs. With AM/FM radio, CD playback, and a user-friendly interface, the KD-R311 captures the essence of what makes JVC receivers popular—quality and ease of use.

In summary, the JVC KD series models, including the KD-R412, KD-R35, KD-R411, KD-R312, and KD-R311, offer a range of features satisfying different preferences and budgets. With robust audio performance, user-friendly interfaces, and versatile connectivity options, these receivers make a strong case for an upgrade to any vehicle’s audio experience.
Top Page Image Contents