JVC GET0624-003A, KD-R312, KD-R311 Using the remote controller For KD-R412/KD-R411, Remote sensor

Page 12

Using the remote controller (For KD-R412/KD-R411)

12

KD-R412/KD-R411 can be remotely controlled as instructed here (with an optionally purchased remote controller). We recommend that you use remote controller RM-RK50 with your unit.

Installing the lithium coin battery (CR2025)

Caution:

•Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

•Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.

If the effectiveness of the remote controller decreases, replace the battery.

Before using the remote controller:

•Aim the remote controller directly at the remote sensor on the unit.

•DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting).

Remote sensor

ENGLISH

1• Turns the power on if pressed briefly. When the power is on, pressing the button also mutes the sound or pauses. To cancel muting or resume playback, press the same button again.

•Turns the power off if pressed and held. 2 • Changes the preset stations.

•Changes the folder of the MP3/WMA. 3 Adjusts the volume level.

4 Selects the sound mode.

5 Selects the source.

6 • Searches for stations if pressed briefly.

•Fast-forwards or reverses the track if pressed and held.

•Changes the tracks if pressed briefly.

Warning (to prevent accidents and damage):

•Do not install any battery other than CR2025 or its equivalent.

•Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time.

•Store the battery in a place where children cannot reach.

•Do not recharge, short, disassemble, heat the battery, or dispose of it in a fire.

•Do not leave the battery with other metallic materials.

•Do not poke the battery with tweezers or similar tools.

•Wrap the battery with tape and insulate when throwing away or saving it.

Page 11 Page 13
Image 12
Page 11 Page 13
Contents KD-R412/KD-R411/ KD-R35/KD-R312/KD-R311 For safety Temperature inside the carBattery Products European Union onlyContents Canceling the display demonstration Setting the clockTurn on the power Initial settingBasic operations ButtonFor KD-R412 KD-R411/KD-R35 When an FM stereo broadcast is hard to receive Automatic presetting FMListening to the radio Manual searchManual presetting FM/AM Selecting a preset stationStandby receptions TA Standby ReceptionListening to a disc Tracing the same programmeAutomatic station selection PTY Standby ReceptionTo cancel repeat play or random play, select Selecting a track/folderSelecting the playback modes Selects folder of the MP3/WMA Selects trackStopping playback and detaching the USB device Source or detach the USB deviceIf a USB device has been attached Connecting an external component to the AUX input jack Adjust the volumeListening to the other external components Mm stereo mini plug not supplied Portable audio player EtcUsing the remote controller For KD-R412/KD-R411 Installing the lithium coin battery CR2025Before using the remote controller Remote sensorSelecting a preset sound mode Storing your own sound modeSelectable setting, Initial Underlined Menu operationsMenu item Selectable setting, Initial Underlined Menu item VOL Adjust VOL ADJ +05SUB.W RearMore about this unit Basic operationsTuner operations Disc operationsPlaying an MP3/WMA disc Preset sound mode ToneMaintenance Troubleshooting Symptom Remedy/CauseA limited number of symbols JolietFile names Noise is generatedWma to non-MP3 or WMA tracks Display Folder that contains MP3/WMA tracksBack in the order you have Intended Will be the first track/folder for playbackSpecifications Power Requirement Operating Voltage Type Compact disc playerNon-contact optical pickup Semiconductor laserHaving Trouble with operation? How to forcibly eject a disc Preparing the remote controller RM-RK50Preparations Listening to the external components Storing your own sound mode Menu operationsPrecautions on power supply and speaker connections When installing the unit without using the sleeveConnecting the external amplifier or subwoofer In-dash mountingTuner operations Disc/USB operationsMaintenance SpecificationsSetting the clock Adjust the hour Adjust the minute Finish the procedureBasic operations Select Clock Select Clock SETTo cancel the prohibition, repeat the same procedure Using the remote controllerSpace Flat = Natural = Dynamic =Installation SleeveRemoving the unit More about this unit Playing MP3/WMA tracks from a USB device for KD-R414General KD-S27 Hold Move to the next or previous character 10.0 kHz, 12.5 kHz 06 to +06 15.0 kHz, 17.5 kHzDisplay TAG OFF Mono *2More about this unit Check the battery system in your car Prepare this before installationPreparation Precautions on power supply and speaker connections Typical connections
Related manuals
Manual 25 pages 40.64 Kb

GET0624-003A, KD-R35, KD-R411, KD-R311, KD-R312 specifications

JVC has long been known for its commitment to quality audio equipment, and its KD series of car receivers is no exception. The JVC KD-R412, KD-R35, KD-R411, KD-R312, and KD-R311 are models that highlight the brand's focus on delivering robust sound performance coupled with user-friendly features.

The JVC KD-R412 stands out with its impressive playback capabilities. It supports various formats, including CD, CD-R/RW, and USB audio. Users can enjoy the convenience of connecting their smartphones through the front USB port, which also supports high-resolution audio playback. This model also features JVC's powerful MOS-FET amplifier, ensuring that listeners experience dynamic sound with clear highs and deep lows.

The KD-R35 offers a budget-friendly option without compromising on quality. Its 4-channel output, combined with a maximum power of 50 watts, delivers ample power for great sound in any vehicle. The KD-R35 also features Bluetooth connectivity, allowing for hands-free calling and audio streaming. The intuitive interface makes it easy for users to navigate through their favorite playlists while driving.

The KD-R411 is another excellent choice for music lovers. It includes a 3-band equalizer, enabling users to customize their audio to suit their preferences. The model is equipped with a digital clock and has a detachable face for enhanced security. Additionally, it supports dual phone connection, allowing users to easily switch between two devices.

The KD-R312 is recognized for its user-centric features, including a large, easy-to-read display. The model supports both USB and auxiliary input, making it versatile for various audio sources. It also comes with a built-in amplifier that ensures powerful sound output, making it perfect for anyone seeking an upgrade for their car's audio system.

Lastly, the KD-R311 rounds up the series with an emphasis on functionality and simplicity. It presents a clean design, making it ideal for straightforward audio needs. With AM/FM radio, CD playback, and a user-friendly interface, the KD-R311 captures the essence of what makes JVC receivers popular—quality and ease of use.

In summary, the JVC KD series models, including the KD-R412, KD-R35, KD-R411, KD-R312, and KD-R311, offer a range of features satisfying different preferences and budgets. With robust audio performance, user-friendly interfaces, and versatile connectivity options, these receivers make a strong case for an upgrade to any vehicle’s audio experience.
Top Page Image Contents