JVC KD-R35, GET0624-003A, KD-R412, KD-R312, KD-R311 Menu operations, Storing your own sound mode

Selecting a preset sound mode

You can select a preset sound mode suitable for the music genre.

FLAT = NATURAL = DYNAMIC =

VOCAL BOOST = BASS BOOST =

USER = (back to the beginning)

While listening, you can adjust the tone level of the selected sound mode.

1[Hold]

2

Adjust the level (–06 to +06) of the selected tone (BASS / MIDDLE / TREBLE).

The sound mode is automatically stored and changed to “USER.”

Storing your own sound mode

You can store your own adjustments in memory.

1 [Hold]

2

]<PRO EQ> ] <BASS> / <MIDDLE> / <TREBLE>

3

Adjust the sound elements of the selected tone ( see table on the right).

4Repeat steps 2 and 3 to adjust other tones.

The adjustments made will be stored automatically in “USER.”

The current sound mode changes to “USER” automatically.

Tone		Sound element
	Frequency		Level	Q
BASS	60 Hz, 80 Hz, 100 Hz,		–06 to +06	Q1.0, Q1.25,
	200 Hz			Q1.5, Q2.0
MIDDLE	0.5 kHz, 1.0 kHz,		–06 to +06	Q0.75, Q1.0,
	1.5 kHz, 2.5 kHz			Q1.25
TREBLE	10.0 kHz, 12.5 kHz,		–06 to +06	Q FIX
	15.0 kHz, 17.5 kHz

Menu operations

1	[Hold]	2			3 Repeat step 2 if necessary.
					• To return to the previous menu, press BACK.
					• To exit from the menu, press DISP or MENU.
Category	Menu item			Selectable setting, [Initial: Underlined]
DEMO	DEMO		• DEMO ON	: Display demonstration will be activated automatically if
				no operation is done for about 20 seconds.
			• DEMO OFF	: Cancels.
CLOCK	CLOCK SET		[ 1:00 ]	: Adjust the hour, then the minute.
EQ	BASS		—	: For settings, see “Storing your own sound mode.”
	MIDDLE
PRO
	TREBLE
	DIMMER		• DIMMER ON	: Dims the display and button illumination.
			• DIMMER OFF	: Cancels.
	SCROLL *1		• SCROLL ONCE	: Scrolls the displayed information once.
DISPLAY			• SCROLL AUTO	: Repeats scrolling (at 5-second intervals).
			• SCROLL OFF	: Cancels.
			Pressing DISP for more than one second can scroll the display regardless of the
			setting.
	TAG		• TAG ON	: Shows the Tag information while playing MP3/WMA
	DISPLAY			tracks.
			• TAG OFF	: Cancels.
	SSM *2		• SSM 01 – 06	: For settings, see “Automatic presetting (FM)—SSM
			• SSM 07 – 12	(Strong-station Sequential Memory)” on page 2.
			• SSM 13 – 18
	AREA		• AREA US	: When using in North/Central/South America. AM/FM
				intervals are set to 10 kHz/200 kHz.
			• AREA EU	: When using in any other areas. AM/FM intervals are set
				to 9 kHz/50 kHz (100 kHz during auto search).
TUNER	MONO *2		• AREA SA	: When using in South American countries where FM
			• MONO ON	: Activate monaural mode to improve FM reception, but
				interval is 100 kHz. AM interval is set to 10 kHz.
				stereo effect will be lost.
			• MONO OFF	: Restore the stereo effect.
	IF BAND		• AUTO	: Increases the tuner selectivity to reduce interference
				noises between adjacent stations. (Stereo effect may be
				lost.)
			• WIDE	: Subject to interference noises from adjacent stations,
				but sound quality will not be degraded and the stereo
				effect will remain.

Category		Menu item		Selectable setting, [Initial: Underlined]
		FADER *3	R06 – F06 [ 00 ]	: Adjust the front and rear speaker output balance.
		BALANCE *4	L06 – R06 [ 00 ]	: Adjust the left and right speaker output balance.
		LOUD	• LOUD ON	: Boost low and high frequencies to produce a well-
				balanced sound at a low volume level.
			• LOUD OFF	: Cancels.
		VOL ADJUST	VOL ADJ –05 —	: Preset the volume adjustment level of each source
			VOL ADJ +05	(except FM), compared to the FM volume level. The
			[VOL ADJ 00]	volume level will automatically increase or decrease when
				you change the source.
				• Before making an adjustment, select the source you
				want to adjust.
				• “VOL ADJ FIX” appears on the display if “FM” is selected
				as the source.
	AUDIO	L/O MODE	• SUB.W	: Select if the REAR LINE OUT terminals are used for
				connecting a subwoofer (through an external amplifier).
			• REAR	: Select if the REAR LINE OUT terminals are used for
				connecting the speakers (through an external amplifier).
		SUB.W	• LOW	: Frequencies lower than 72 Hz are sent to the subwoofer.
		FREQ *5	• MID	: Frequencies lower than 111 Hz are sent to the subwoofer.
			• HIGH	: Frequencies lower than 157 Hz are sent to the subwoofer.
		SUB.W	SUB.W 00 —	: Adjust the subwoofer output level.
		LEVEL *5	SUB.W 08
			[ SUB.W 04 ]
		BEEP	• BEEP ON	: Activates the keypress tone.
			• BEEP OFF	: Deactivates the keypress tone.
		AMP GAIN *6	• LOW POWER	: VOLUME 00 – VOLUME 30 (Select if the maximum power
				of each speaker is less than 50 W to prevent damaging the
				speakers.)
			• HIGH POWER	: VOLUME 00 – VOLUME 50
	SRC SELECT	AM *7	• AM ON	: Enable “AM” in source selection.
			• AM OFF	: Disable “AM” in source selection.
		AUX IN *8	• AUX ON	: Enable “AUX IN” in source selection.
			• AUX OFF	: Disable “AUX IN” in source selection.
*1	Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*2	Displayed only when the source is “FM.”
*3	If you are using a two-speaker system, set the fader level to “00.”
*4	This adjustment will not affect the subwoofer output.
*5	Displayed only when <L/O MODE> is set to <SUB.W>.
*6	The volume level automatically changes to “VOLUME 30” if you change to <LOW POWER> with the volume level
	is set higher than “VOLUME 30.”
*7	Displayed only when any source other than “AM” is selected.
*8	Displayed only when any source other than “AUX IN” is selected.

3