More about this unit

Troubleshooting

	Symptom	Remedy/Cause
	Sound cannot be heard from the	• Adjust the volume to the optimum level.
	speakers.	• Make sure the unit is not muted/paused. (See page 1.)
		• Check the cords and connections.
	“PROTECT” appears on the display and no	Check to be sure the terminals of the speaker leads are
General	operations can be done.	covered with insulating tape properly, then reset the
General		If “PROTECT” does not disappear, consult your JVC
		unit. (See page 1.)
		car audio dealer or a company supplying kits.
	This unit does not work at all.	Reset the unit. (See page 1.)
	“AUX IN” cannot be selected.	Check the <SRC SELECT> = <AUX IN> setting. (See
		“Menu operations” on page 3.)
FM/AM	SSM automatic presetting does not work.	Store stations manually.

	“AM” cannot be selected.	Check the <SRC SELECT> = <AM> setting. (See “Menu
	Static noise while listening to the radio.	Connect the antenna firmly.
		operations” on page 3.)

	Disc cannot be played back.	Insert the disc correctly.
	• CD-R/CD-RW cannot be played back.	• Insert a finalized CD-R/CD-RW.
	• Tracks on the CD-R/CD-RW cannot be	• Finalize the CD-R/CD-RW with the component which
	skipped.	you used for recording.
playback	Disc can be neither played back nor	• Unlock the disc. (See page 2.)
	Disc can be neither played back nor	• Unlock the disc. (See page 2.)
	ejected.	• Eject the disc forcibly. (See page 1.)
Disc	Disc sound is sometimes interrupted.	• Stop playback while driving on rough roads.
Disc		• Change the disc.
		• Check the cords and connections.
	“NO DISC” appears on the display.	Insert a playable disc into the loading slot.
	“PLEASE” and “EJECT” appear alternately	Press 0, then insert a disc correctly.
	on the display.
	Disc cannot be played back.	• Use a disc with MP3/WMA tracks recorded in a format
		compliant with ISO 9660 Level 1, Level 2, Romeo, or
		Joliet.
		• Add the extension code <.mp3> or <.wma> to the file
		names.
	Noise is generated.	Skip to another track or change the disc. (Do not add
		the extension code <.mp3> or <.wma> to non-MP3 or
		WMA tracks.)
playback	A longer readout time is required	Do not use too many hierarchical levels and folders.
	A longer readout time is required	Do not use too many hierarchical levels and folders.
	(“READING” keeps flashing on the display).
MP3/WMA	Tracks are not played back in the order	Playback order is determined when the files are
MP3/WMA	you have intended.	folder that contains MP3/WMA tracks.
	you have intended.	recorded.
	“NO FILE” appears on the display.	Selected folder is an empty folder *. Select another
		* Folder that is physically empty or folder that contains data
		but does not contain valid MP3/WMA track.
	“NOT SUPPORT” appears on the display	Skip to the next track encoded in an appropriate format
	and track skips.	or to the next non-copy-protected WMA track.
	The elapsed playing time is not correct.	This sometimes occurs during playback. This is caused
		by how the tracks are recorded on the disc.
	The correct characters are not displayed	This unit can only display letters (upper case), numbers,
	(e.g. album name).	and a limited number of symbols. (See page 2.)
	Noise is generated.	The track played back is not an MP3/WMA track. Skip to
		another file. (Do not add the extension code <.mp3>
		or <.wma> to non-MP3 or WMA tracks.)
	“READING” keeps flashing on the display.	• Readout time varies depending on the USB device.
		• Do not use too many hierarchy or folders.
		• Turn off the power then on again.
		• Reattach the USB device again.
	“NO FILE” appears on the display.	Selected folder is an empty folder*. Select another
		folder that contains MP3/WMA tracks.
playback		* Folder that is physically empty or folder that contains
playback		data but does not contain valid MP3/WMA track.
		data but does not contain valid MP3/WMA track.
	“NOT SUPPORT” appears on the display	Skip to the next track encoded in an appropriate format
device	and track skips.	or to the next non-copy-protected WMA track.
device	Tracks/folders are not played back in the	The playback order is determined by the write-in time
	Tracks/folders are not played back in the	The playback order is determined by the write-in time
USB	order you have intended.	stamp. The first track/folder written into the USB device
USB		will be the first track/folder for playback.
		will be the first track/folder for playback.
	• “CANNOT PLAY” flashes on the display.	• Attach a USB device that contains tracks encoded in
	• “NO USB” appears on the display.	an appropriate format.
	• The unit cannot detect the USB device.	• Reattach the USB device again.
	While playing a track, sound is sometimes	The MP3/WMA tracks have not been properly copied
	interrupted.	into the USB device.
		Copy MP3/WMA tracks again into the USB device, and
		try again.
	Correct characters are not displayed (e.g.	This unit can only display letters (upper case), numbers,
	album name).	and a limited number of symbols. (See page 2.)

General

•If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power.

•If no operation is done for about 60 seconds after pressing MENU button, the operation will be canceled.

Tuner operations

• During SSM search...

–All previously stored stations are erased and the stations are stored anew.

–When SSM is over, the station stored in the lowest preset number will be automatically tuned in.

•When storing a station manually, the previously preset station is erased when a new station is stored in the same preset number.

•If you try to assign titles to more than 30 station frequencies, “NAME FULL” appears. Delete unwanted titles before assignment.

Disc/USB operations

Caution for DualDisc playback

•The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non-DVD side of a DualDisc on this product may not be recommended.

General

•This unit has been designed to reproduce CDs/ CD Texts, and CD-Rs (Recordable)/CD-RWs (Rewritable) in audio CD (CD-DA), MP3 and WMA formats.

•If you change the source while listening to a disc, playback stops. Next time you select “CD” as the playback source, playback will start from where it had been stopped previously.

•If the ejected disc is not removed within

15 seconds, it is automatically inserted into the loading slot again to protect it from dust. Playback starts automatically.

Playing a CD-R or CD-RW

•Use only “finalized” CD-Rs or CD-RWs.

•This unit can play back multi-session discs; however, unclosed sessions will be skipped while playing.

•Some CD-Rs or CD-RWs may not be played back on this unit:

–Discs are dirty or scratched.

–Moisture condensation has occurred on the lens inside the unit.

–The pickup lens inside the unit is dirty.

–The files on the CD-R/CD-RW are written using the “Packet Write” method.

–There are improper recording conditions (missing data, etc.) or media conditions (stained, scratched, warped, etc.).

•CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than that of regular CDs.

Playing an MP3/WMA disc

•This unit can play back MP3/WMA files with the extension code <.mp3> or <.wma> (regardless of the letter case—upper/lower).

•This unit can show the names of albums, artists (performer), and tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files.

•This unit can display only one-byte characters. No other characters can be correctly displayed.

•This unit can play back MP3/WMA files meeting the conditions below:

–Bit rate: 32 kbps — 320 kbps

–Sampling frequency of MP3:

32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)

–Sampling frequency of WMA:

22.05kHz, 32 kHz, 44.1 kHz, 48 kHz

–Disc format: ISO 9660 Level 1/ Level 2, Romeo, Joliet, Windows extension

•The maximum number of characters for file/folder names vary depending on the disc format used (includes 4 extension characters—<.mp3> or <.wma>).

–ISO 9660 Level 1: up to 12 characters; ISO 9660 Level 2: up to 31 characters; Romeo: up to 64 characters; Joliet: up to 32 characters; Windows extension: up to 64 characters

•This unit can recognize a total of 512 files, 255 folders, and 8 hierarchical levels.

•This unit can play back files recorded in VBR (variable bit rate).

Files recorded in VBR have a discrepancy in the elapsed time display, and do not show the actual elapsed time. In particular, this difference becomes noticeable after performing the search function.

•This unit cannot play back the following files:

–MP3 files: encoded in MP3i and MP3 PRO format; an inappropriate format; layer 1/2.

–WMA files: encoded in lossless, professional, and voice format; not based upon Windows Media® Audio; copy-protected with DRM.

–Files which have data such as AIFF, ATRAC3, etc.

•The search function works but search speed is not constant.

Playing MP3/WMA tracks from a USB device

•While playing from a USB device, the playback order may differ from other players.

•This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions.

•Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose.

•Connect one USB mass storage class device to the unit at a time. Do not use a USB hub.

•If the connected USB device does not have the correct files, “CANNOT PLAY” appears.

•This unit can show Tag (Version 1.0, 1.1, 2.2, 2.3, or 2.4) for MP3 files and for WMA files.

•This unit can play back MP3/WMA files meeting the conditions below:

–Bit rate: 32 kbps — 320 kbps

–Sampling frequency of MP3:

32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2)

–Sampling frequency of WMA:

22.05kHz, 32 kHz, 44.1 kHz, 48 kHz

•This unit can play back MP3 files recorded in VBR (variable bit rate).

•The maximum number of characters for:

–Folder names: 32 characters; File names: 32 characters; MP3 Tag: 64 characters; WMA Tag: 32 characters

•This unit can recognize a total of 5 000 files, 255 folders (255 files per folder including folder without unsupported files), and of 8 hierarchies.

•This unit does not support SD card reader.

•This unit cannot recognize a USB device whose rating is other than 5 V and exceeds 500 mA.

•USB devices equipped with special functions such as data security functions cannot be used with the unit.

•Do not use a USB device with 2 or more partitions.

•This unit may not recognized a USB device connected through a USB card reader.

•This unit may not play back files in a USB device properly when using a USB extension cord.

•This unit cannot play back the following files:

–MP3 files: encoded in MP3i and MP3 PRO format; an inappropriate format; layer 1/2.

–WMA files: encoded in lossless, professional, and voice format; not based upon Windows Media® Audio.

Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

JVC bears no responsibility for any loss of the data in the USB mass storage class device while using this System.

4 – EN

GET0624-003A, KD-R35, KD-R411, KD-R311, KD-R312 specifications

JVC has long been known for its commitment to quality audio equipment, and its KD series of car receivers is no exception. The JVC KD-R412, KD-R35, KD-R411, KD-R312, and KD-R311 are models that highlight the brand's focus on delivering robust sound performance coupled with user-friendly features.

The JVC KD-R412 stands out with its impressive playback capabilities. It supports various formats, including CD, CD-R/RW, and USB audio. Users can enjoy the convenience of connecting their smartphones through the front USB port, which also supports high-resolution audio playback. This model also features JVC's powerful MOS-FET amplifier, ensuring that listeners experience dynamic sound with clear highs and deep lows.

The KD-R35 offers a budget-friendly option without compromising on quality. Its 4-channel output, combined with a maximum power of 50 watts, delivers ample power for great sound in any vehicle. The KD-R35 also features Bluetooth connectivity, allowing for hands-free calling and audio streaming. The intuitive interface makes it easy for users to navigate through their favorite playlists while driving.

The KD-R411 is another excellent choice for music lovers. It includes a 3-band equalizer, enabling users to customize their audio to suit their preferences. The model is equipped with a digital clock and has a detachable face for enhanced security. Additionally, it supports dual phone connection, allowing users to easily switch between two devices.

The KD-R312 is recognized for its user-centric features, including a large, easy-to-read display. The model supports both USB and auxiliary input, making it versatile for various audio sources. It also comes with a built-in amplifier that ensures powerful sound output, making it perfect for anyone seeking an upgrade for their car's audio system.

Lastly, the KD-R311 rounds up the series with an emphasis on functionality and simplicity. It presents a clean design, making it ideal for straightforward audio needs. With AM/FM radio, CD playback, and a user-friendly interface, the KD-R311 captures the essence of what makes JVC receivers popular—quality and ease of use.

In summary, the JVC KD series models, including the KD-R412, KD-R35, KD-R411, KD-R312, and KD-R311, offer a range of features satisfying different preferences and budgets. With robust audio performance, user-friendly interfaces, and versatile connectivity options, these receivers make a strong case for an upgrade to any vehicle’s audio experience.