HOW TO REMOVE STAINS
•Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.
•Always consider the type of fabric you are treating to make sure you do not use a water temperature that is too hot or a treatment that will alter the color of the fabric. It pays to test
•Place the garment being treated on an absorbent cloth (eg on an old towel). Work from the reverse side of the stain, as this can force the stain off the fabric instead of through it.
•Use cold or warm water on unknown stains as hot water can set some stains.
•Some stains are not easily seen when the fabric is wet. Air dry the stained garment to be sure the stain has been removed, as heat from a dryer may set the stain.
•Take care with stain removal treatments as they are often flammable and highly poisonous. Do not use them on your washer as they may damage the paint or plastic components.
•Some pretreatment sprays or liquids can damage your washer’s control panel.
DIAPER SANITIZERS
Diaper Sanitizers are very corrosive to metal surfaces, and will cause damage to the paint work and components of your washer.
DO NOT soak diapers in sanitizer in your washer or tip the contents of the diaper bucket into your machine. Rinse and wring diapers out thoroughly before placing them in the washer.
22