Fisher & Paykel GWLO8 manual Changing PRE-SET Options, Option Adjustment Mode

Page 25

CHANGING PRE-SET OPTIONS

OPTION ADJUSTMENT MODE

After using your Smart Drive you may want to change some of the pre-set options to suit your wash needs.

You can change the following pre-set options:

•the rinse option on Heavy Duty, Regular and Wool cycles

•the amount of water used in the Water Saver option

•the number of beeps at the end of the cycle

•the Out of Balance recovery routine

•the fill level selected by auto water level

To make these changes it is necessary to enter the “Option Adjustment Mode”.

TO ENTER OPTION ADJUSTMENT MODE

1. Plug the machine in, but do not press POWER. Press START / PAUSE and hold down.

Press POWER.

2. When the buttons have been pressed correctly the machine will give two quick beeps and show an unusual pattern of lights.

In this mode the lights are used to indicate the different options available. The diagram on page 24 shows how the lights relate to the options you can change.

Pages 25 - 27 explain the different options in more detail.

3.Use the buttons on the panel to make your changes to the pre-set options.

4.Press POWER to return to normal mode.

5.Your Smart Drive will automatically remember your changes.

6.To make further changes, repeat the above steps.

23

Image 25

Contents Use Care Page Contents Hydrogen GAS can be Explosive Under These Circumstances Water Heater SafetyPage Do not tamper with the controls Important Safety InstructionsOperating Instructions Loading Using Your Smart Drive Power and WaterDetergent BleachWash Cycle Fabric SoftenerWash Options StartWash Cycles Wash Cycles and OptionsDuty To Alter the Wash Options Changing the Wash OptionsWarm HOT Warm Cold Advancing the Wash Cycle Clothes Care SafeguardsTo Shorten the Wash Time Stopping the MachineAuto Water Level Water LevelsManual Water Level Selection Actual Level of WaterTo USE Water Saver Water SaverTo USE Delay Start Delay StartTime Saver To USE Time SaverSpin Hold SoakTo USE Soak To USE Spin HoldProgramming Your Favorite Cycle Favorite CycleTo USE Favorite Cycle To Customize the Wash Cycles Customizing the Wash CyclesWool Cycle is for washing Washing WoollensMachine Washable Woollens Sorting Before YOU WashWashing Bulky Items LoadingBefore Washing Maximum Wash LoadScrud DetergentChoosing the Right Detergent HOW Much DETERGENT?Fabric Softener Cleaning the DispenserBleach HOW the Fabric Softener is DispensedDiaper Sanitizers HOW to Remove StainsTo Enter Option Adjustment Mode Option Adjustment ModeChanging PRE-SET Options Press Start / Pause and hold down. Press Power Rinse Options Volume of Water Used in the Water Saver OptionRinse Options END of Cycle Beeps OUT of Balance Recovery RoutineAuto Water Fill Level Machine Information Care and CleaningProducts That Might Damage Your Smart Drive Smart Drive Sounds and BeepsDimensions Model SpecificationsL08 Water Consumption Rinse OptionsSaving Water Problem SolvingRecycling the Wash Water Recycling the Water from Deep RinseReturn Hose to Drain Manual Suds Save with Siphon BackProblems Wash ProblemsAuthorized Service Agent Operating ProblemsSymptoms Machine is Giving a Short Burst of BEEPS* If Your Smart Drive Beeps for HelpIf the Machine Beeps ContinuouslyToll Free 888 9FNP USA 888 936 Washer WarrantyPage Proof of Purchase ServiceModel Number Serial No Purchaser Dealer Address