Installation Instructions

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

■A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. A time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

■This washer is equipped with a power supply cord having a 3 prong grounding plug.

■To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, grounding-type outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.

■If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

■Do not ground to a gas pipe.

■Check with a qualified electrician if you are not sure the washer is properly grounded.

■Do not have a fuse in the neutral or ground circuit.

GROUNDING INSTRUCTIONS

For a grounded, cord-connected washer:

This washer must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resistance for electric current. This washer is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.

Remove Transport System

WARNING

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer is within approximately 3 ft (90 cm) of its final location.

There are 4 bolts in the rear panel of the washer that support the suspension system during transportation. These bolts also retain

the power cord inside the washer until the bolts are removed.

1. Using a 13 mm wrench, loosen each of the bolts.

4709, 110.4708 specifications

The Kenmore 110.4708* and 110.4709* are popular washing machines recognized for their durability, efficiency, and contemporary features that cater to a diverse range of laundry needs. These models are designed to bring convenience and performance to users, whether washing a small load or bulky items.

One of the standout features of these Kenmore models is their large capacity drum. With enough space to accommodate sizable loads, they reduce the frequency of laundry days and allow users to wash more efficiently. The washer's design also ensures that clothes are evenly cleaned, thanks to its advanced agitation system, which provides thorough washing while being gentle on fabrics.

In terms of technology, the Kenmore 110.4708* and 110.4709* utilize a variety of wash cycles designed to handle different types of fabrics and stains. These cycles include options for delicate items, heavy-duty fabrics, and even quick wash settings that save time for lightly soiled clothes. The intuitive control panel makes it user-friendly, allowing users to select their desired settings with ease.

Energy efficiency is another key characteristic of these washing machines. They are designed to meet or exceed ENERGY STAR certification, which means they consume less water and energy compared to traditional models. This feature not only helps users save on utility bills but also contributes to a more sustainable lifestyle.

The build quality of Kenmore appliances is notable, as they are constructed with durable materials that resist wear and tear over time. The machines are also designed with noise-reduction technologies, ensuring they operate quietly, making them suitable for homes where noise is a concern.

Maintenance is simplified with these models, as they incorporate self-cleaning mechanisms that reduce the need for extensive upkeep. Additionally, the availability of replacement parts and customer service support makes troubleshooting and repairs manageable for homeowners.

Overall, the Kenmore 110.4708* and 110.4709* washing machines are an excellent choice for those seeking reliability, efficiency, and modern features in their laundry routine. With their combination of capacity, versatility, and energy-efficient operation, these models enhance the laundry experience and provide a valuable addition to any household.