You can customize your wash by adding OPTIONS to your cycle selections. You can add or change an option after starting a cycle anytime before the selected option begins. Not all Options are available with all cycles.
OPTIONS
PREWASN
@
2ND RINSE
EXTENDED SPIN
See the "Laundry Guide" section for an overview of possible options for each Wash Cycle selection.
You can select more than one option for a cycle. Some options cannot be added to some cycles.
If an option is available with a selected cycle, the light for that option will glow when selected.
If an option is unavailable with a selected cycle, there will be a short tone, and the light for that option will not glow when selected.
Prewash
Use this option for loads of heavily soiled garments that need pretreatment.
•Add detergent to the detergent compartment of the Dispenser Drawer.
This option adds tumbling time prior to the selected main cycle. The washer continues automatically from prewash into the main wash cycle.
2nd Rinse
A second rinse can be used to ensure the removal of detergent or bleach residue from garments. This option provides an additional rinse with the same water temperature as the first rinse.
Extended Spin
Use this option to add an additional spin to any cycle to improve the "fluff" of your laundry, to reduce drying time, and to save energy.
Preset cycle settings of Wash/Rinse Temp, Water Temp, Spin Speed, and Soil Level can be changed. You can change a modifier after starting a cycle anytime before the selected modifier begins. Not all Modifiers are available with all options and cycles,
MODIFIERS
AuTOTEMPCON7/_OL | O HIGH |
|
| |||
® HOT! COLD | • | MEDUUM |
|
| ||
O WARM / | WARM | • | LOW | • | HUGH | |
0 WARM | / | COLD | • | EXTRA LOW | e | Low |
@ COLD / COLD | o | NO SPIN | @ | OFF | ||
|
|
|
| 0 | 0 | |
WATER | TEMP |
| SPIN SPEED | END of | CYCLE SIGNAL | |
WASH / | RINS£ |
|
|
|
| |
To change the water temperature, select the WATER TEMP button until the desired setting glows.
To change the spin speed, select the SPIN SPEED button until the desired setting glows.
® HEAVY |
|
o NORMAL | :)))) |
|
o LIGHT
0
SOIL LEVEL
•To change cycle time, select SOIL LEVEL button.
•To change the loudness of the End of Cycle Signal, select END of CYCLE SIGNAL.
Wash/Rinse Temp
Select a water temperature based on the type of load you are
washing. Use the warmest water safe for fabrics. Follow garment label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.
Temperature | Guide |
|
|
|
|
Wash Water | Temperature | Suggested | Fabrics | ||
HOT |
| Whites | and | pastels | |
122°F (50°C) or above | Heavy | soils |
|
| |
WARM |
| Bright | colors |
| |
104°F (40°C) |
| Moderate to light | soils | ||
COLD |
| Colors | that | bleed | or fade |
77°F (25°C) |
| Light soils |
|
| |
In wash water temperatures colder than 70°F (21 °C), detergents do not dissolve weft. Soils may be difficult to remove.
15