E(ectrica) Shock Hazard
P(ug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Fai(ure to fo))ow these instructions can resuJt in death, fire, or e(ectdca( shock.
A
This washer is equipped with a power supply cord having a 3 prong ground plug.
To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong,
If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.
Do not ground to a gas pipe.
Check with a qualified electrician if you are not sure the washer is properly grounded.
•Do not have a fuse in the neutral or ground circuit.
1.3 prong grounding plug
2.3 prong
3.Grounding prong
GROUNDING (NSTRUCT(ONS
For a grounded,
This washer must be grounded, in the event of a map function or breakdown, grounding wii( reduce the risk of ebctdca( shock by providing a path of least resist- ance for electric current, This washer is equipped with a cord having an
WARN(NG: improper connection of the equipment- grounding conductor can result in a risk of electric shock, Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is prop- erly grounded,
Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician,
For a permanently connected washer:
This washer must be connected to a grounded metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the
(((((((((((((((((((((
4. Power supply cord