Whirlpool Front-Load Washer manual Electrical Requirements, Grounding Instructions

Page 6

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

A 120-volt, 60-Hz., AC-only, 15- or 20-ampere, fused electrical supply is required. Time-delay fuse or circuit breaker is recommended. It is recommended that a separate circuit serving only this appliance be provided.

This washer is equipped with a power supply cord having a 3 prong ground plug.

To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, ground-type outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure the washer is properly grounded.

Do not have a fuse in the neutral or ground circuit.

2

1

3

4

1.3 prong grounding plug

2.3 prong grounding-type wall receptacle

3.Grounding prong

4.Power supply cord

GROUNDING INSTRUCTIONS

For a grounded, cord-connected washer:

This washer must be grounded. In the event of a mal- function or breakdown, grounding will reduce the risk of electrical shock by providing a path of least resist- ance for electric current. This washer is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and ground- ed in accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is prop- erly grounded.

Do not modify the plug provided with the appliance – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment-grounding terminal or lead on the appliance.

6

Image 6
Contents Laveuse Automatique À Table of Contents/Table des matièresFRONT-LOADING Use & Care GuideTable of Contents Washer Safety Your safety and the safety of others are very importantOptional Pedestal Installation RequirementsTools and Parts Alternate Parts You May NeedDrain System Washer DimensionsRecessed area or closet installation Laundry tub drain system viewElectrical Requirements Grounding InstructionsConnect the Inlet Hoses Installation InstructionsRemove Transport System Route the Drain HoseComplete Installation Secure the Drain HoseLevel the Washer Electronic Controls Accuwash Automatic Temperature ControlCatalyst Cleaning Action with Direct Injection Smart DispensersFirst Wash Cycle Without Laundry Washer USEStarting Your Washer To load washerDetergent compartment Using the DispenserChoosing the Right Detergent To fill dispenser compartmentsPausing or Restarting Status LightsCycles Options ModifiersLaundry Tips Laundry GuideLoading Water Inlet Hoses Cleaning Your WasherWasher Care Vacation, Storage, and Moving CareTroubleshooting Did you sort properly? Are you using a low speed wash cycle?Was the wash temperature too low? Did you overload the washer?U.S.A If you need replacement partsFor service in Canada CanadaWhirlpool Washer Warranty Whirlpool Corporation will not pay forSécurité DE LA Laveuse Votre sécurité et celle des autres est très importanteOutils nécessaires pour l’installation Exigences ’INSTALLATIONExigences d’emplacement Outils et piècesSystème de vidange Installation électrique AvertissementRaccordement des tuyaux d’alimentation Instructions ’INSTALLATIONEnlèvement du système de transport Acheminement du tuyau de vidangeAchever l’installation Immobilisation du tuyau de vidangeRéglage de l’aplomb de la laveuse Caractéristiques ET Avantages Premier programme de lavage sans linge à laver Utilisation DE LA LaveuseMise en marche de la laveuse Pour charger la laveuseCompartiment du détergent Utilisation du distributeurChoix du détergent approprié Pour commencer immédiatement le programme deCompartiment d’assouplissant de tissu Pause ou remise en marcheChangement de programmes, options et Modificateurs Compartiment d’eau de JavelTémoins lumineux ProgrammesDrain/Spin Vidange/essorage Soak TrempageRinse/Spin Rinçage/essorage Réglages préréglés des programmesWash/Rinse Temp Température de lavage/rinçage Extra Rinse Rinçage supplémentaireRinse Hold Rinçage/attente Guide de températureConseils DE Lessivage Guide de lessivageChargement Entretien DE LA Laveuse Nettoyage de la laveuseDépannage Avez-vous utilisé suffisamment de détergent? Avez vous effectué le tri correctement?Avez-vous surchargé la laveuse? Avez-vous bien trié la charge?Au Canada Pour le service au CanadaAux États-Unis Si vous avez besoin de pièces de rechangeGarantie DE LA Sécheuse Whirlpool Whirlpool Corporation ne paiera pas pour4619 7020 Whirlpool Corporation All rights reserved

Front-Load Washer specifications

Whirlpool has established itself as a leader in home appliances, and its Front-Load Washer is a standout model that embodies innovation and efficiency. Designed to meet the needs of modern households, this washer features a sleek, space-saving design that not only enhances your laundry room but also provides ample capacity for family-sized loads.

One of the main features of the Whirlpool Front-Load Washer is its advanced washing technology. Equipped with Adaptive Wash Technology, the washer automatically adjusts the cycle settings based on the size of the load and the amount of soil in the clothes. This ensures optimal cleaning performance while conserving water and energy, making it an environmentally-friendly choice.

Energy efficiency is further enhanced with the Energy Star certification, which signifies that the washer meets stringent energy-saving guidelines. Users can save on utility bills while also contributing to a sustaining environment. The washer uses less water and energy per load compared to traditional top-load models, allowing for impressive cleaning without excess waste.

The precision cleaning system is another key characteristic of the Whirlpool Front-Load Washer. This feature combines several technologies to ensure that dirt and stains are effectively eliminated. The efficient wash action and specialized wash motions work together to provide a thorough clean, while the sensitive drying technology gently tumbles clothes to prevent overdrying, preserving fabric quality.

Moreover, the washer offers a variety of wash cycles to accommodate different fabrics and cleaning needs. From delicate cycles for gentle fabrics to heavy-duty options for sturdy items like towels and bed linens, users can select the most suitable settings for their laundry.

Additional features include a smooth, durable drum that is designed to be gentle on clothes, as well as a delay start option that allows you to schedule washes at your convenience. The user-friendly control panel with intuitive buttons and a digital display makes selecting the right cycle a breeze.

Overall, the Whirlpool Front-Load Washer combines innovative technology with intuitive design, making it a top choice for households looking for efficiency, performance, and ease of use in their laundry routines. Whether you're washing a small load of delicates or tackling a large pile of family laundry, this washer is equipped to handle it all with precision.