Whirlpool Front-Load Washer manual Secure the Drain Hose, Level the Washer, Complete Installation

Page 8

Secure the Drain Hose

1.Drape the power cord over the washer top.

2.Secure the drain hose to the laundry tub leg or standpipe with the beaded strap provided. (See illustrations 1 and 2.)

1

2

3

If the washer faucets and the drain standpipe are recessed (see illustration 3), put the hooked end of the drain hose in the standpipe. Tightly wrap the beaded strap around the water inlet hoses and the drain hose.

Do not force excess drain hose into the standpipe.

Level the Washer

Properly leveling your washer prevents excessive noise and vibration.

1.Check the levelness of the washer by placing a level on the top edge of the washer, first side-to-side, then front-to-back.

If the washer is against a wall, move the washer out slightly before tipping back. If the washer is not level, first prop the front with a wood block (2" x 4") and adjust the feet as necessary; then prop the back and adjust feet as necessary. Repeat this step until washer is level.

2.After the washer is level, use a ⁵⁄₈ in. (17 mm) open-end wrench to turn the nuts on the feet tightly against the washer cabinet.

All 4 feet must be tightened. If the nuts are not tight against the washer cabinet, the washer may vibrate.

3.Slide the washer to its final location.

4.Confirm the levelness of the washer.

Complete Installation

1.Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended grounding method. (See “Electrical Requirements.”)

2.Check to be sure all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

3.Check to be sure you have all of your tools.

4.Dispose/recycle all packaging materials.

5.Check to be sure the water faucets are on.

6.Check for leaks around faucets and inlet hoses.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

7.Plug into a grounded 3 prong outlet.

8.Read “Washer Use.”

9.To test and to clean your washer, measure ¹⁄₂ the normal recommended amount of powdered or liquid High Efficiency (HE) detergent or ¼ the normal recommended amount of regular powdered or liquid detergent. Pour the detergent into the detergent dispenser. Select NORMAL/CASUAL, and then select HOLD TO START. Allow the washer to complete one whole cycle.

8

Image 8
Contents Table of Contents/Table des matières FRONT-LOADINGLaveuse Automatique À Use & Care GuideTable of Contents Washer Safety Your safety and the safety of others are very importantInstallation Requirements Tools and PartsOptional Pedestal Alternate Parts You May NeedWasher Dimensions Recessed area or closet installationDrain System Laundry tub drain system viewElectrical Requirements Grounding InstructionsInstallation Instructions Remove Transport SystemConnect the Inlet Hoses Route the Drain HoseLevel the Washer Complete InstallationSecure the Drain Hose Accuwash Automatic Temperature Control Catalyst Cleaning Action with Direct InjectionElectronic Controls Smart DispensersWasher USE Starting Your WasherFirst Wash Cycle Without Laundry To load washerUsing the Dispenser Choosing the Right DetergentDetergent compartment To fill dispenser compartmentsPausing or Restarting Status LightsCycles Options ModifiersLoading Laundry TipsLaundry Guide Cleaning Your Washer Washer CareWater Inlet Hoses Vacation, Storage, and Moving CareTroubleshooting Are you using a low speed wash cycle? Was the wash temperature too low?Did you sort properly? Did you overload the washer?If you need replacement parts For service in CanadaU.S.A CanadaWhirlpool Washer Warranty Whirlpool Corporation will not pay forSécurité DE LA Laveuse Votre sécurité et celle des autres est très importanteExigences ’INSTALLATION Exigences d’emplacementOutils nécessaires pour l’installation Outils et piècesSystème de vidange Installation électrique AvertissementInstructions ’INSTALLATION Enlèvement du système de transportRaccordement des tuyaux d’alimentation Acheminement du tuyau de vidangeRéglage de l’aplomb de la laveuse Achever l’installationImmobilisation du tuyau de vidange Caractéristiques ET Avantages Utilisation DE LA Laveuse Mise en marche de la laveusePremier programme de lavage sans linge à laver Pour charger la laveuseUtilisation du distributeur Choix du détergent appropriéCompartiment du détergent Pour commencer immédiatement le programme dePause ou remise en marche Changement de programmes, options et ModificateursCompartiment d’assouplissant de tissu Compartiment d’eau de JavelTémoins lumineux ProgrammesSoak Trempage Rinse/Spin Rinçage/essorageDrain/Spin Vidange/essorage Réglages préréglés des programmesExtra Rinse Rinçage supplémentaire Rinse Hold Rinçage/attenteWash/Rinse Temp Température de lavage/rinçage Guide de températureChargement Conseils DE LessivageGuide de lessivage Entretien DE LA Laveuse Nettoyage de la laveuseDépannage Avez vous effectué le tri correctement? Avez-vous surchargé la laveuse?Avez-vous utilisé suffisamment de détergent? Avez-vous bien trié la charge?Pour le service au Canada Aux États-UnisAu Canada Si vous avez besoin de pièces de rechangeGarantie DE LA Sécheuse Whirlpool Whirlpool Corporation ne paiera pas pour4619 7020 Whirlpool Corporation All rights reserved

Front-Load Washer specifications

Whirlpool has established itself as a leader in home appliances, and its Front-Load Washer is a standout model that embodies innovation and efficiency. Designed to meet the needs of modern households, this washer features a sleek, space-saving design that not only enhances your laundry room but also provides ample capacity for family-sized loads.

One of the main features of the Whirlpool Front-Load Washer is its advanced washing technology. Equipped with Adaptive Wash Technology, the washer automatically adjusts the cycle settings based on the size of the load and the amount of soil in the clothes. This ensures optimal cleaning performance while conserving water and energy, making it an environmentally-friendly choice.

Energy efficiency is further enhanced with the Energy Star certification, which signifies that the washer meets stringent energy-saving guidelines. Users can save on utility bills while also contributing to a sustaining environment. The washer uses less water and energy per load compared to traditional top-load models, allowing for impressive cleaning without excess waste.

The precision cleaning system is another key characteristic of the Whirlpool Front-Load Washer. This feature combines several technologies to ensure that dirt and stains are effectively eliminated. The efficient wash action and specialized wash motions work together to provide a thorough clean, while the sensitive drying technology gently tumbles clothes to prevent overdrying, preserving fabric quality.

Moreover, the washer offers a variety of wash cycles to accommodate different fabrics and cleaning needs. From delicate cycles for gentle fabrics to heavy-duty options for sturdy items like towels and bed linens, users can select the most suitable settings for their laundry.

Additional features include a smooth, durable drum that is designed to be gentle on clothes, as well as a delay start option that allows you to schedule washes at your convenience. The user-friendly control panel with intuitive buttons and a digital display makes selecting the right cycle a breeze.

Overall, the Whirlpool Front-Load Washer combines innovative technology with intuitive design, making it a top choice for households looking for efficiency, performance, and ease of use in their laundry routines. Whether you're washing a small load of delicates or tackling a large pile of family laundry, this washer is equipped to handle it all with precision.