Samsung r1031gws, R1031GWS YLR Setting up a wash machine, Remove the safety device for carriage

Page 30

12. Setting up a wash machine.

12-1 Remove the safety device for carriage

1)Remove 3 safety device volts with a enclosed wrench for safety device remove

2)Plug the 3 holes with 3 caps after removing the 3 safety device volts.

* Take care of 3 safety device volts and a wrench , you need these when you move wash machine safely.

Caution

You must remove safety device before use , if not, you have much vibration or much load can br impacted on

the machine.

1.Remove safety device behind of machine

●To protect the machine, remove the assembled 3 safety device

2.Plug the 3 holes

●Plug the 3 holes after safety device with the caps enclosed inside of washing tub

①

② ③

12-2 Install the wash machine on the leveled place.

With the water level adjustment device, adjust the 4 adjustment legs to install the machine leveled on the right, left, front and rear side. machine's install condition and size is following.

12-2-1 Initial assembled condition (ass'y cover top)

1) Adjustment legs are stick to the bottom of the machine, when the machine comes out of factory. this condition is ideal for vibration and noise.

2) When you install the machine initially or move the machine in use, unscrew the 4 legs to the left and place the machine level and spin the locking nuts and tighten it strongly.

29

Image 30

Contents Washing Machine Do not allow the customer to repair the product Specifications Power ConsumptionSafety Devices Overview of the Washing Machine Overview of the control panel Door open function Auto power S/W off functionMain function No spin functionPower-out compensation function Water heater Error functionFuzzy washing function weight-sensing Bubble -detecting functionUnbalance detecting & laundry balance positioning system Final dehydrating r.p.m at each course Water level data at each courseOther water level data General Error Function ASSí Y Pressure S/W ErrorTacho Error Motor Triac short ErrorThermistor error Power Supply Plug Trouble DiagnosisCause and treatment Problem Checkking And Method Of Pcb Part Of Power SourceReset Part Interrupt PartChecking The Part Of An Oscillator Micom Number, 9 Is 5Voltage? Confirm The Driving Part Of Motor Checking The Tacho Part Test Mode Driving Compartment Test ModeDoor safety Device Designation of Main ComponentsNormal / Reverse Revolution of Motor and R. P. M. Control Shock absorber and buffer spring HeaterDetergent tub and water supply value Hot water valve1 wayASSY-TUB Back PCB Schematic Diagram PCB Circuit Diagram ASSY-PCB Part List Part Code Code no Qty Description Spercificatio RemarkInstall the wash machine on the leveled place Setting up a wash machineRemove the safety device for carriage Initial assembled condition assy cover topCondition of setting up sink Disassembled Assy- Cover Top Door Opening DimensionSlim Model SideAssemble and Disassemble ASSí Y-COVER TOPBelt Tools for Disassembly and Assembly ToolTopfront Exploded View TUB Exploded View Case Exploded View Parts List SEAL-OILTS0-PJT,NBRSD35,BLK,-,-,-,JIN Screw/Bolt List Electronics