Washing a Load of Laundry
Washing clothes manually
You can wash clothes manually without using the Fuzzy Logic feature. To do so:
1.Turn on the water at the water source sink.
2.Press the (On/Off) button on the washing machine.
3.Press the Door Open button. (P805J)
Note: You cannot open the door until you press (On/Off).
4.Open the door.
5.Load the articles one at a time loosely into the drum, without overfilling.
6.Close the door.
7.Put the detergent and, if necessary, softener or chlorine bleach, in the appropriate compartments.
8.Press the Wash/Rinse Temperature button to select the water temperature (Warm/Cold➔ Warm/Warm➔ Hot/Cold ➔ Cold/Cold )
9.Press the Spin button to select the spin speed, [no, rh, 400, 600 and 800 revolutions per minute(rpm)].
Note: The rinse hold program allows you to take clothes that are dripping wet out of the washing machine.
no : No Spin, rh : Rinse Hold.
10.Press the Extra Rinse button to select the Extra Rinse (if needed).
11.Press the Start/Pause button and the machine will begin the cycle.
When the cycle is finished:
1.Press the Door Open button. (P805J)
Note: The door will not open until 3 minutes after the machine stops or the power turns off. (P803J, P801)
2.Remove laundry.
12 SAMSUNG Washing Machine Owner’s Instructions