Important to Installer, Location Considerations

If the new Dryer is installed into an existing exhaust system you must make sure:

•The exhaust system meets all local, state, and national codes.

•That a flexible plastic duct is not used.

•To Inspect and clean all lint buildup from inside the existing duct.

•The duct is not kinked or crushed.

•The exhaust hood damper opens and closes freely.

The static pressure in any exhaust system must not exceed 0.83 inches of water column, or be less than 0.

This can be measured while the Dryer is running with a manometer at the point where the exhaust duct connects to the Dryer. A no-heat setting should be used. The Dryer tumbler should be empty and the lint filter clean.

IMPORTANT TO INSTALLER

Please read the following instructions carefully before installing the dryer. These instructions should be kept for future reference.

REMOVE THE DOOR FROM ALL DISCARDED APPLIANCES TO AVOID THE DANGER OF A CHILD WARNING SUFFOCATING.

LOCATION CONSIDERATIONS

The dryer should be located where there is enough space at the front for loading the Dryer, and enough space behind for the exhaust system. This Dryer is factory-ready for rear exhaust. To exhaust out the bottom or the left, use the accessory exhaust kit. Instructions are included with the kit. It’s important to make sure the room has enough fresh air. The Dryer must be located where there is no air-flow obstruction.

On gas Dryers, adequate clearance as noted on the data plate must be maintained to ensure adequate air for combustion and proper Dryer operation.

THE DRYER MUST NOT BE INSTALLED OR STORED IN AN AREA WHERE IT WILL BE EXPOSED TO WATER AND/OR WEATHER. THE DRYER AREA IS TO BE KEPT CLEAR OF COMBUSTIBLE MATERIALS, GASOLINE, AND OTHER FLAMMABLE VAPORS AND LIQUIDS. A DRYER PRODUCES COMBUSTIBLE LINT. THE AREA AROUND THE DRYER SHOULD BE KEPT LINT-FREE.

ALCOVE OR CLOSET INSTALLATION

The Dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or

WARNING closet.

•No other fuel-burning appliance should be installed in the same closet as the Dryer.

•WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED TO THE OUTDOORS. See EXHAUST INFORMATION section.

•Minimum clearances between the Dryer and adjacent walls or other surfaces are: 2” in front, 17” on top, 1” on either side, and 2.375” in the back.

•The closet front must have two unobstructed air openings for a combined minimum total area of 72 in² with 3” minimum clearance on the top and bottom. A louvered door with equivalent space clearance is acceptable.

01 installing your dryer

installing your dryer _9

DV218AEW-02568B_EN.indd 9

2008-04-14 ¿ÀÈÄ 2:14:04

DV218AEW, DV218AGB, DV218AGW specifications

Samsung's DV218AGW, DV218AGB, and DV218AEW are advanced front-loading washing machines that bring efficiency and modern technology to the heart of laundry chores. These models are designed not just for aesthetic appeal but also for high performance, energy efficiency, and ease of use.

One of the main features across these models is their innovative EcoBubble technology. This technology allows the washing machine to dissolve detergent evenly and enhance its penetration power even in cool water. As a result, it provides a powerful clean while being gentle on fabrics, making it an attractive option for households that care about garment longevity and energy conservation.

The DV218 series boasts a sizable drum capacity, accommodating larger loads and minimizing the number of washes needed. This feature not only saves time but also energy, making these models ideal for busy families and individuals. The machines also incorporate intelligent sensors that adjust the washing cycle based on the load size and fabric type, ensuring optimal washing performance with every use.

In terms of usability, the DV218 models are equipped with an intuitive digital display and a variety of preset washing programs to cater to diverse laundry needs. Features such as delayed start and quick wash options provide additional flexibility, allowing users to customize their washing experience.

The machines are also built with Samsung's VRT (Vibration Reduction Technology), which significantly minimizes noise and vibration during spin cycles. This makes them perfect for small apartments or homes where quiet operation is crucial. Furthermore, the machines are designed with a self-cleaning feature that helps maintain the cleanliness of the drum and enhances hygiene.

Additional characteristics include a high energy efficiency rating, which is a significant advantage for environmentally-conscious users looking to cut down on utility bills. The DV218AGW, DV218AGB, and DV218AEW models also feature a sleek design with a choice of color options that can blend seamlessly with modern home decor.

Overall, the Samsung DV218AGW, DV218AGB, and DV218AEW washing machines stand out in the marketplace for their blend of advanced technology, high capacity, and user-friendly features, making laundry day a more efficient and less time-consuming task.