JVC KD-G116, KD-G115 manual Parts list for installation and connection, Removing the receiver

Page 65

KD-G116/KD-G115

Installation/Connection Manual

GET0252-008A

1004DTSMDTJEIN

[UT]

EN, CT

ENGLISH

This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.

Parts list for installation and connection

The following parts are provided for this receiver.

After checking them, please set them correctly.

A / B

C

D

E

Hard case/Control panel

Sleeve

Trim plate

Power cord

F

G

H

I

J

Washer (ø5)

Lock nut (M5)

Mounting bolt (M5 x 20 mm)

Rubber cushion

Handles

INSTALLATION (IN-DASH MOUNTING)

The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits.

If you are not sure how to install this receiver correctly, have it installed by a qualified technician.

Do the required electrical connections.

*1 When you stand the receiver, be careful not to damage the fuse on

the rear.

Removing the receiver

Before removing the receiver, release the rear section.

Bend the appropriate tabs to hold the sleeve firmly in place.

Insert the two handles, then pull them as illustrated so that the receiver can be removed.

When using the optional stay /

Fire wall

Stay (option)

 

Dashboard

Screw (option)

Install the receiver at an angle of less than 30˚.

When installing the receiver without using the sleeve /

In a Toyota for example, first remove the car radio and install the receiver in its place.

Flat type screws

* Not included for this receiver.

(M5 x 8 mm)*

 

 

Bracket*

 

Flat type screws

Pocket

(M5 x 8 mm)*

Bracket*

 

Note : When installing the receiver on the mounting bracket, make sure to use the 8 mm-long screws. If longer screws are used, they could damage the receiver.

TROUBLESHOOTING

The fuse blows.

* Are the red and black leads connected correctly?

Power cannot be turned on. * Is the yellow lead connected?

No sound from the speakers.

* Is the speaker output lead short-circuited?

Sound is distorted.

*Is the speaker output lead grounded?

*Are the “–” terminals of L and R speakers grounded in common?

Noise interfere with sounds.

* Is the rear ground terminal connected to the carʼs chassis using shorter and thicker cords?

Receiver becomes hot.

*Is the speaker output lead grounded?

*Are the “–” terminals of L and R speakers grounded in common?

This receiver does not work at all. * Have you reset your receiver?

1

Image 65
Contents Instructions How to forcibly eject a disc Contents How to read this manual Parts identification Control panel KD-G116/KD-G115Getting started To drop the volume in a moment ATTCanceling the display Demonstrations Listening to the radio Radio operationsStoring stations in memory Playing a disc Disc operationsMode To check the current clock time while listening to a discFor Preset values Sound adjustmentsTo do Range Adjusting the soundBasic procedure General settings PSMAttaching the control panel Detaching the control panelHow to clean the connectors MaintenanceTuner operations More about this receiverBasic operations Symptoms Causes Remedies TroubleshootingAudio Amplifier Section SpecificationsEN, TH KD-G116/KD-G115 Installation/Connection ManualElectrical Connections Instructions Buku Petunjuk How to forcibly eject a disc Contents How to read this manual Control panel KD-G116/KD-G115 Getting started Canceling the display Demonstrations Radio operations Storing stations in memory Disc operations Selecting the playback modes Sound adjustments Adjusting the sound General settings PSM Detaching the control panel Maintenance More about this receiver Troubleshooting Having Trouble with operation? EN, Removing the receiver Memindahkan alat penerima KD-G116/KD-G115Typical connections / Ciri khas sambungan-sambungan Connecting the external amplifier / Menyambung penguat luarGET0252-007A How to forcibly eject a disc Contents How to read this manual Control panel KD-G116/KD-G115 Getting started Canceling the display Demonstrations Radio operations Storing stations in memory Disc operations Selecting the playback modes Sound adjustments Adjusting the sound General settings PSM Detaching the control panel Maintenance More about this receiver Troubleshooting Having Trouble with operation? EN, CT When using the optional stay Parts list for installation and connectionWhen installing the receiver without using the sleeve Removing the receiverTypical connections Connecting the external amplifierPrecautions on power supply and speaker connections

KD-G115, KD-G116 specifications

The JVC KD-G116 and KD-G115 are high-performance car audio receivers that offer a seamless blend of sound quality, user-friendly features, and cutting-edge technology. Designed for audiophiles and casual listeners alike, these models provide a range of functionalities that enhance your driving experience.

One of the standout features of both the JVC KD-G116 and KD-G115 is their exceptional sound quality. With a built-in powerful amplifier, these receivers deliver crisp treble and rich bass, ensuring that your favorite music sounds great on the road. The adjustable EQ settings allow users to customize their audio output according to personal preferences, making each listening experience unique.

The KD-G116 and KD-G115 are equipped with AM/FM tuners that support RDS (Radio Data System), which enables users to receive additional information from compatible radio stations, such as song titles and artist names. This feature allows for a more interactive and informative listening experience. Additionally, these models include support for CD playback, providing a traditional option for those who still enjoy physical media.

In terms of connectivity, both models are designed with modern technology in mind. They come with a front auxiliary input and USB port, allowing for easy connection of smartphones, tablets, and other portable media devices. This flexibility means that users can enjoy their favorite digital music collections with ease. Furthermore, the KD-G116 features Bluetooth wireless technology for hands-free calling and audio streaming, making it easier and safer to enjoy music or take calls while driving.

Another highlight of these receivers is their user-friendly interface, which includes a clear LCD display and intuitive controls. The large buttons make it easy to navigate through settings and playlists while keeping your focus on the road. The detachable faceplate also adds a layer of security, ensuring that the unit is protected from theft.

In terms of vehicle integration, both the KD-G116 and KD-G115 are compatible with a wide range of vehicles, making them a versatile choice for many drivers. The installation process is straightforward, with detailed instructions provided for those who prefer a DIY approach.

Overall, the JVC KD-G116 and KD-G115 are excellent choices for anyone looking to upgrade their car audio system. With their blend of sound quality, modern connectivity options, and user-friendly design, these receivers stand out as reliable and feature-rich options in the competitive car audio market.