Blomberg WNF9422SC20 user manual Important safety instructions, General safety, Intended use

Page 2

1 Important safety instructions

This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty.

General safety

This product should not be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who will instruct them accordingly for use of the product.

Never place the product on a carpet- covered floor; otherwise, lack of airflow beneath the machine will cause electrical parts to overheat. This will cause problems with your product.

Do not operate the product if the power cable / plug is damaged. Call the

Authorized Service Agent.

Have a qualified electrician connect a

16-Ampere fuse to the installation location of the product.

If the product has a failure, it should not be operated unless it is repaired by the

Authorized Service Agent. There is the risk of electric shock!

This product is designed to resume operating in the event of powering on after a power interruption. If you wish to cancel the programme, see "Cancelling the programme" section.

Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Do not neglect to have the grounding installation made by a qualified electrician. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

The water supply and draining hoses must be securely fastened and remain undamaged. Otherwise, there is the risk of water leakage.

Never open the loading door or remove the filter while there is still water in the drum. Otherwise, risk of flooding and injury from hot water will occur.

Do not force open the locked loading door. The loading door will be ready to open just a few minutes after the washing cycle comes to an end. In case of forcing the loading door to open, the door and the lock mechanism may get damaged.

Unplug the product when not in use.

Never wash the product by spreading or pouring water onto it! There is the risk of

electric shock!

Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out by grabbing the plug.

Use detergents, softeners and supplements suitable for automatic washing machines only.

Follow the instructions on the textile tags and on the detergent package.

The product must be unplugged during installation, maintenance, cleaning and repairing procedures.

Always have the installation and repairing procedures carried out by the Authorized Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorized persons.

Intended use

This product has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use.

The product must only be used for washing and rinsing of laundry that are marked accordingly.

The manufacturer waives any responsibility arisen from incorrect usage or transportation.

Children's safety

Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product.

Do not forget to close the loading door when leaving the room where the product is located.

Store all detergents and additives in a safe place away from the reach of the children.

2 - EN

Image 2
Contents WNF 9422 SC20 Childrens safety Important safety instructionsGeneral safety Intended useAppropriate installation location InstallationConnecting water supply Removing the transportation locksElectrical connection Connecting to the drainAdjusting the feet Therefore, follow the heights described in the figureTransportation of the product First useDisposing of packaging material Disposing of the old productPreparation Using softeners Detergent, softener and other cleaning agentsAdjusting detergent amount Choosing the detergent typeUsing limescale remover Using starchUsing bleaches Display symbols a Spin Symbol Spin Speed Adjustment Button On/Off Button DisplayTemperature Adjustment Button Control panelMain programs Turning the machine onProgram selection CottonsEconomy Symbol Eco CleanSelf Clean Temperature selectionProgram and consumption table SelectableAuxiliary functions Child-proof lock Selecting or canceling an auxiliary function in pause modeProgram has started and is still continuing fades out End of programCleaning the water intake filters Maintenance and cleaningCleaning the detergent drawer Draining remaining water and cleaning the pump filterIf any, around the pump impeller region. Install the filter Models Technical specificationsTotal current a Total power W Spin speed rpm maxTroubleshooting Page Bestimmungsgemäßer Gebrauch Wichtige Hinweise zu Ihrer SicherheitAllgemeine Sicherheit Sicherheit von KindernTransportstabilisatoren entfernen Installation/AufstellungDer richtige Aufstellungsort Transportsicherungen entfernenWasserablauf anschließen Füße einstellenVerpackungsmaterialien entsorgen Elektrischer AnschlussErste Inbetriebnahme Gerät transportierenVorbereitung Die richtige Waschmittelmenge Waschmittel, Weichspüler und andere ReinigungsmittelDer richtige Waschmitteltyp WeichspülerKalkentferner StärkeBleichmittel Anzeigesymbole BedienfeldProgrammauswahl Eco Clean Öko-ReinMaschine einschalten HauptprogrammeSpezialprogramme Self Clean SelbstreinigenEnergiesparsymbol SpülenProgramm- und Verbrauchstabelle Zusatzfunktionen Kindersicherung Maschine in den Bereitschaftsmodus schaltenTürsperre Waschprogramm abbrechenWasserzulauffilter reinigen Reinigung und WartungWaschmittelschublade reinigen Restliches Wasser ablaufen lassen und Pumpenfilter reinigenPage Technische Daten Problemlösung Programme lassen sich nicht starten oder auswählen