Blomberg WNF9422SC20 Eco Clean, Self Clean, Economy Symbol, Special programs, Rinse, Spin + Drain

Page 11

• Eco Clean

You can use this program, which is more sensitive to environment and natural resources, to wash lightly soiled and unspotted cotton laundry (max 3.5 kg) in a short time and economical way. It is suggested to use liquid or gel washing detergents.

• Self Clean

It is suggested to run this program with certain intervals (e.g. once in 1 or 2 months) for the self-cleaning of your machine. This program must certainly be run without any laundry in the machine. Make sure that the machine is empty before starting the program. For more effective cleaning, you can run the program by adding powder lime remover for washing machines into compartment II of the detergent drawer. After the program is completed, leave the door ajar to allow the inside of the machine get dry.

C This is not a program for washing laundry. This is a maintenance program for the machine.

C Never use this program if there is something in your machine.

C When this feature is started your machine senses the load inside of it automatically, if any, and interrupts the program.

Economy Symbol

Shows energy saving programs and temperature selections.

As "Intensive" and "Hygiene" programs are long programs with higher temperature selections to ensure hygiene, “Economy” Symbol will not light up.

Special programs

For specific applications, select any of the following programs:

• Rinse

This program is used when you want to rinse or starch separately.

• Spin + Drain

This program spins with maximum possible rpm in the default setting after the water drains from the machine.

C Use a lower spin speed for delicate laundries.

Temperature selection

Whenever a new program is selected, the temperature anticipated for that program appears on the temperature indicator.

To change the temperature, press the temperature button. Temperature decreases in 10° increments.

Cold selection is shown with “-” symbol.

 

Normally soiled, white cottons and

90˚C

linens. (Ex.: coffee table covers,

 

tablecloths, towels, bed sheets)

 

Normally soiled, fade proof colored

 

linens, cottons or synthetic clothes

60˚C

(Ex.: shirts, nightgowns, pajamas)

 

and lightly soiled white linen clothes

 

(Ex.: underwear)

40˚C

Blended clothes including

synthetics and woolens as well as

30˚C Cold

delicates.

 

Spin Speed selection

Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator.

To decrease the spin speed, press the “Spin” button. Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively.

Rinse hold is shown with “” and no spin is

shown with “” symbols.

If you are not going to unload your clothes immediately after the cycle, you may use rinse hold function in order to prevent your clothes become wrinkled when there is no water in the machine. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function:

-Adjust the spin speed.

-Press “Start/Pause/Cancel” button.

Program resumes. Your machine drains the water and spins your laundry.

You can use no spin function in order to drain the water without spinning at the end of the program.

11 - EN

Image 11
Contents WNF 9422 SC20 Intended use Important safety instructionsGeneral safety Childrens safetyRemoving the transportation locks InstallationConnecting water supply Appropriate installation locationTherefore, follow the heights described in the figure Connecting to the drainAdjusting the feet Electrical connectionDisposing of the old product First useDisposing of packaging material Transportation of the productPreparation Choosing the detergent type Detergent, softener and other cleaning agentsAdjusting detergent amount Using softenersUsing limescale remover Using starchUsing bleaches Control panel Spin Speed Adjustment Button On/Off Button DisplayTemperature Adjustment Button Display symbols a Spin SymbolCottons Turning the machine onProgram selection Main programsTemperature selection Eco CleanSelf Clean Economy SymbolSelectable Program and consumption tableAuxiliary functions End of program Selecting or canceling an auxiliary function in pause modeProgram has started and is still continuing fades out Child-proof lockDraining remaining water and cleaning the pump filter Maintenance and cleaningCleaning the detergent drawer Cleaning the water intake filtersIf any, around the pump impeller region. Install the filter Spin speed rpm max Technical specificationsTotal current a Total power W ModelsTroubleshooting Page Sicherheit von Kindern Wichtige Hinweise zu Ihrer SicherheitAllgemeine Sicherheit Bestimmungsgemäßer GebrauchTransportsicherungen entfernen Installation/AufstellungDer richtige Aufstellungsort Transportstabilisatoren entfernenFüße einstellen Wasserablauf anschließenGerät transportieren Elektrischer AnschlussErste Inbetriebnahme Verpackungsmaterialien entsorgenVorbereitung Weichspüler Waschmittel, Weichspüler und andere ReinigungsmittelDer richtige Waschmitteltyp Die richtige WaschmittelmengeKalkentferner StärkeBleichmittel Bedienfeld AnzeigesymboleHauptprogramme Eco Clean Öko-ReinMaschine einschalten ProgrammauswahlSpülen Self Clean SelbstreinigenEnergiesparsymbol SpezialprogrammeProgramm- und Verbrauchstabelle Zusatzfunktionen Waschprogramm abbrechen Maschine in den Bereitschaftsmodus schaltenTürsperre KindersicherungRestliches Wasser ablaufen lassen und Pumpenfilter reinigen Reinigung und WartungWaschmittelschublade reinigen Wasserzulauffilter reinigenPage Technische Daten Programme lassen sich nicht starten oder auswählen Problemlösung