Blomberg WNF9422SC20 user manual Using starch, Using bleaches, Using limescale remover

Page 8

CUse the tablet or gel detergent without selecting the prewash function.

Using starch

Add liquid starch, powder starch or the dyestuff into the softener compartment as instructed on the package.

Do not use softener and starch together in a washing cycle.

Wipe the inside of the machine with a damp and clean cloth after using starch.

Using bleaches

Select a programme with prewash and add the bleaching agent at the beginning of the prewash. Do not put detergent in the prewash compartment. As an alternative application, select a programme with extra rinse and add the bleaching agent while the machine is taking water from the detergent compartment during first rinsing step.

Do not use bleaching agent and detergent by mixing them.

Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation. Do not pour the bleaching agent onto the clothes and do not use it for coloured clothes.

When using oxygen based bleaches, follow the instructions on the package and select a programme that washes at a lower temperature.

Oxygen based bleaches can be used together with detergents; however, if its thickness is not the same with the detergent, put the detergent first into the compartment nr. "II" in the detergent drawer and wait until the detergent flows while the machine is taking in water.

Add the bleaching agent from the same compartment while the machine is still taking in water.

Using limescale remover

When required, use limescale removers manufactured specifically for washing machines only.

Always follow instructions on the package.

8 - EN

Image 8
Contents WNF 9422 SC20 Important safety instructions General safetyChildrens safety Intended useInstallation Connecting water supplyAppropriate installation location Removing the transportation locksConnecting to the drain Adjusting the feetElectrical connection Therefore, follow the heights described in the figureFirst use Disposing of packaging materialTransportation of the product Disposing of the old productPreparation Detergent, softener and other cleaning agents Adjusting detergent amountUsing softeners Choosing the detergent typeUsing limescale remover Using starchUsing bleaches Spin Speed Adjustment Button On/Off Button Display Temperature Adjustment ButtonDisplay symbols a Spin Symbol Control panelTurning the machine on Program selectionMain programs CottonsEco Clean Self CleanEconomy Symbol Temperature selectionProgram and consumption table SelectableAuxiliary functions Selecting or canceling an auxiliary function in pause mode Program has started and is still continuing fades outChild-proof lock End of programMaintenance and cleaning Cleaning the detergent drawerCleaning the water intake filters Draining remaining water and cleaning the pump filterIf any, around the pump impeller region. Install the filter Technical specifications Total current a Total power WModels Spin speed rpm maxTroubleshooting Page Wichtige Hinweise zu Ihrer Sicherheit Allgemeine SicherheitBestimmungsgemäßer Gebrauch Sicherheit von KindernInstallation/Aufstellung Der richtige AufstellungsortTransportstabilisatoren entfernen Transportsicherungen entfernenWasserablauf anschließen Füße einstellenElektrischer Anschluss Erste InbetriebnahmeVerpackungsmaterialien entsorgen Gerät transportierenVorbereitung Waschmittel, Weichspüler und andere Reinigungsmittel Der richtige WaschmitteltypDie richtige Waschmittelmenge WeichspülerKalkentferner StärkeBleichmittel Anzeigesymbole BedienfeldEco Clean Öko-Rein Maschine einschaltenProgrammauswahl HauptprogrammeSelf Clean Selbstreinigen EnergiesparsymbolSpezialprogramme SpülenProgramm- und Verbrauchstabelle Zusatzfunktionen Maschine in den Bereitschaftsmodus schalten TürsperreKindersicherung Waschprogramm abbrechenReinigung und Wartung Waschmittelschublade reinigenWasserzulauffilter reinigen Restliches Wasser ablaufen lassen und Pumpenfilter reinigenPage Technische Daten Problemlösung Programme lassen sich nicht starten oder auswählen