160°F/
71 °C max.
q Push down the insert until it clicks into placeq. q Reinsert the detergent dispenser into place.
Unscrew the pump cap slightly until the washing solution slowly begins to run into the cover plate cavity.
Cleaning | the | drain | pump | q When the cover | plate cavity is | half | full, | tighte | |||
This is necessary if | the water | cannot be drained | the pump cap and empty the | cover plate | |||||||
cavity. |
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
| |
completely. This could result if | the pump | is blockedRepeat | the | last | two steps until | all | the | washin | |||
by debris or | accumulated lint. |
|
| solution | has | been drained. |
|
|
| ||
|
|
|
|
|
|
|
| ||||
Draining the | water |
|
|
|
|
|
|
|
|
|
|
Up to 20 litres/4.4 gal may be drained. Have a |
|
|
|
|
|
|
| ||||
suitable container ready. |
|
|
|
|
|
|
|
|
| ||
CAUTION
Avoid risk of scalding!
Allow the hot water to cool.
Keep children and pets away from the washing machine.
q Turn the program selectorOffto.
q Completely remove the pump cap.
q Remove any loose debris/lint from inside the pump and clean the pump. The pump impell must be able to rotate.
Clean any remaining water or lint from the threads of the pump cap and pump housing.
q Fold down the cover panel.
20