Dimensions
a = | 600 mm //5/23" |
| 8 |
b = | 590 mm //1/ " |
| 22 |
c= 852 mm //1/2"33
Approx. weight = 69 kg // 152 lbs.
Installation area
d WARNING d
Never ground the washer to plastic plumbing lines, gas lines or hot water pipes.
Appliance stability is important to make sure the washing machine does not •walk" during the spin cycles.
The installation area must be solid and even. So floor surfaces, such as carpets or surfaces with foam backing, are not suitable.
If the washing machine is to be installed on a wooden floor:
q | If possible, place the | washing machine in a | |
| corner | of the room. |
|
q | Screw | a waterTresistant wooden board (at leas | |
| 30 mm | thick) to the | floor. |
q Secure the feet of the washing machine using holding brackets *.
If the washing machine is to be placed on a pedestal:
q Secure the feet of the washing machine using holding brackets *.
*Holding brackets (set) can be obtained from the Customer Service (order no. WMZ 2200).
| d | WARNING | d | |
| To reduce the risk of fire | this washer must b | ||
| ||||
| fastened or otherwise secured to an uncovered | |||
| concrete | floor. |
|
|
|
|
|
|
|
Pedestal | Mounting |
|
| |
For mounting the washer on the Bosch 12" | ||||
pedestal (accessory No. WTZ 1210) follow the | ||||
instructions | supplied with the | pedestal. | ||
28