Cleaning water inlet strainers Cleaning the strainers on the washing machin
On both the hotH and coldC water tap:
This is necessary if very little or no water flows into the washing machine.
First release the water pressure in the supply hoses:
q Turn off the water taps.
q Turn the program selector to any program (except Spin orDrain).
q Press | theStart button and allow the program |
to run | for approx. 40 seconds. |
q Turn the program selectorOffto.
Cleaning the strainer(s) at the water tap
On both the hot and cold water tap:
q Disconnect the hose from the back of the washing machine.
q Disconnect the hose from the water tap.
q Rinse the strainer under flowing water.
q Reconnect the hose.
q | Pull out the strainer and rinse under running | ||
| water. |
|
|
q | Insert the strainer and reconnect the hose. |
| |
q | Turn on the | water tap and check whether | w |
| is discharged. | If water is discharged, check | t |
| the strainer is inserted properly. |
| |
q | Turn off the | water tap. |
|
22