Electrolux 16830 Programme Option buttons, Position 40C Easy iron, Position Cold = cold wash

Page 12

Description of the appliance

Position 40°C Easy iron.

In this position the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier.

Position COLD = cold wash

Programme Option buttons

Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before depressing the START/PAUSE button.

When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.

When an incorrect option is selected, the button light flashes for 2 sec- onds and in the display the Err message appears.

PREWASH

The machine performs a prewash cycle. The prewash cycle ends with a short spin in programmes for Cotton and Easy cares, and with empty- ing of the water without spinning for Delicates.

This option is not available with the wool programme and cannot be used with STAIN option.

For use when washing heavily soiled laundry.

STAIN

To treat heavily soiled or stained laundry with stain remover (extended main wash with time optimised stain action phase, not selectable for wool or programmes with temperatures lower than 40°C).

This function cannot be used with PREWASH.

SENSITIVE

By depressing this button the washing intensity will be reduced. The machine adds one rinse in the programmes for COTTONS and EASY CARES. This option cannot be used with EASY IRON.

TIME SAVER

By pressing this button the washing time is reduced. For use when washing lightly soiled laundry.

This option is not available with wool and economy programme.

12

Image 12
Contents Lavamat Turbo Dear customer Contents Programme charts wash and special programmes Automatic washing and drying NON-STOP programmePage Safety instructions General safetyInstallation Child safety During useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialProgramme Option buttons Position 40C Easy ironPosition Cold = cold wash START/PAUSE button StartPause Delay Timer button Electronic Drying buttonDrying Time button DisplayCancelling a programme Programme progress displayAltering a programme which is running Opening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundrySort of laundry Approximate Dry weights Types of fabric and care labelsCotton SyntheticsDelicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersPreparing the drying cycle LoadGarments not suitable for drying Sort of laundryDrying symbols on garment labels Duration of the drying cycleModification of the drying time or degree of drying Fibre residueHow to wash Max. loadLoad the laundry Add detergent and additiveSelection of the desired wash programme Selection of the desired optionsSelection of the Delay Timer option Selection of the Rinse + extra rinse optionStarting the programme At the end of the programme How to dry Automatic washing and dryingNON-STOP programme Drying only Max. loadProgramme chart Wash programmesSpecial programmes DescripMax Consumption Tion Timed Drying Degree of dryingMax. load Spin speed Drying time 900Consumption data for timed drying Max Water Energy Duration Load Litres KWhCleaning and maintenance Maintenance WashPeriodical cleaning Exterior After each washDoor seal Drain pumpWater inlet filter Emergency emptying outFrost precautions TroubleshootingSomething not working? Problem Possible cause Water inlet hose isProblem Possible cause Solution Distributed E10Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService & Spare Parts Service & Spare Parts08705 929 Help us to help you Customer careStandard Guarantee Conditions ExclusionsEuropean Guarantee Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Front view and side viewRear view Installation UnpackingInstallation on a suspended floor PositioningLevelling Water inlet cold water connection only Water drainageDo not connect to a hot water supply Into a drainage standpipeOnto a sink outlet spigot Interest of the environment Electrical connectionsPermanent connection Electrolux plc