Electrolux 16830 manual Safety instructions, General safety, Installation

Page 6

Safety instructions

Your safety is of paramount importance, please ensure you read this instruction book before installing or using this appliance.

General safety

Repairs to the machine must be carried out only by qualified person- nel. Repairs carried out by inexperienced persons could cause injury or serious malfunctioning. Contact your local AEG/ELECTROLUX Service Force Centre.

Never start the machine if the mains cable is damaged or the control panel or worktop are damaged allowing inner components to be accessible.

Unplug the appliance before carrying out any cleaning or mainte- nance operations.

Never pull the mains cable to remove the plug from the socket; always take hold of the plug itself.

During high temperature wash programmes and during the drying cycle, the door glass may get hot.

Let the water cool down before carrying out emergency emptying or before opening the door in an emergency.

Installation

Follow the installation instructions carefully.

Carry out a first wash without laundry (COTTONS 60, with half the amount of detergent) in order to remove any manufacturing residue from the tub and the drum.

Your appliance is provided of a new «antiflood device». To make active this feature is needed close the bottom of the machine with the bottom cover that you can find inside the drum. Please read the instructions inserted into bottom cover bag.

6

Image 6
Contents Lavamat Turbo Dear customer Contents Programme charts wash and special programmes Automatic washing and drying NON-STOP programmePage Safety instructions General safetyInstallation Child safety During usePackaging materials DisposalTips for environmental protection MachineMain features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialProgramme Option buttons Position 40C Easy ironPosition Cold = cold wash START/PAUSE button StartPause Drying Time button Delay Timer buttonElectronic Drying button DisplayCancelling a programme Programme progress displayAltering a programme which is running Opening the door after the programme has started Detergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels SyntheticsDelicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersGarments not suitable for drying Preparing the drying cycleLoad Sort of laundryModification of the drying time or degree of drying Drying symbols on garment labelsDuration of the drying cycle Fibre residueLoad the laundry How to washMax. load Add detergent and additiveSelection of the desired wash programme Selection of the desired optionsSelection of the Delay Timer option Selection of the Rinse + extra rinse optionStarting the programme At the end of the programme NON-STOP programme How to dryAutomatic washing and drying Drying only Max. loadProgramme chart Wash programmesSpecial programmes DescripMax Consumption Tion Max. load Spin speed Drying time Timed DryingDegree of drying 900Consumption data for timed drying Max Water Energy Duration Load Litres KWhPeriodical cleaning Exterior Cleaning and maintenanceMaintenance Wash After each washDoor seal Drain pumpWater inlet filter Emergency emptying outFrost precautions TroubleshootingSomething not working? Problem Possible cause Water inlet hose isProblem Possible cause Solution Distributed E10Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directivesService & Spare Parts Service & Spare Parts08705 929 Help us to help you Customer careStandard Guarantee Conditions ExclusionsEuropean Guarantee Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Front view and side viewRear view Installation UnpackingInstallation on a suspended floor PositioningLevelling Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Into a drainage standpipeOnto a sink outlet spigot Interest of the environment Electrical connectionsPermanent connection Electrolux plc